Round self-adhesive furniture glides for hard floors protect smooth hardwood, tile, laminate, vinyl, and stone from round furniture legs of any material — wood, metal, plastic, or hollow tube. The PA6 needle-punched sliding surface (1,450 g/m² pile density) moves silently and outlasts cheap felt pads by years. EHBF (Extra High Bond Foam) acrylic tape bonds to any clean, smooth leg base without tools. 5 sizes from Ø 23 mm to Ø 75 mm. Available in multiples of 4.
Not sure what size? See the size chart ↓
📦 Sold in packs of 4 — quantity adjustable at checkout
Round self-adhesive furniture glides for hard floors protect smooth hardwood, tile, laminate, vinyl, and stone from round furniture legs of any material — wood, metal, plastic, or hollow tube. Where nail-on glides require solid wood, these round self-adhesive furniture glides bond to any clean, smooth leg base with EHBF (Extra High Bond Foam) acrylic tape. No tools. No drilling. No rivets.
The PA6 needle-punched sliding surface (1,450 g/m² pile density) moves silently across every smooth hard floor type and outlasts cheap felt pads by years under daily use. 5 sizes from Ø 23 mm to Ø 75 mm. Available in multiples of 4. For anti-slip grip instead of smooth sliding, use round anti-slip self-adhesive furniture glides.
Round self-adhesive furniture glides for hard floors are available in five diameters to match the actual base of the leg. The glide should match the leg as closely as possible — oversized glides overhang and lift at the edges, undersized glides leave the leg perimeter unprotected.
For legs Ø 23–27 mm
Side chairs, lightweight seats
For legs Ø 28–37 mm
Dining chairs, desk chairs
For legs Ø 38–49 mm
Accent chairs, heavier seating
For legs Ø 50–74 mm
Dining tables, coffee tables
For legs Ø 75 mm and above
Conference tables, heavy furniture
Need a wider range of round sizes? Round self-adhesive furniture pads are available in 33 diameters from Ø 12 mm to Ø 300 mm — the same PA6 needle-punched surface with EHBT fiberglass mesh adhesive backing. For bulk orders and commercial fit-outs, visit Business Solutions.
The most common mistake when buying round self-adhesive furniture glides for hard floors is ordering by guesswork. A 28 mm glide on a 38 mm leg wobbles and leaves the leg edge directly in contact with the floor. Correct sizing is even more important with self-adhesive glides — an overhanging edge that catches during chair movement will peel the glide off the leg entirely.
Lay it on its side or flip it upside down. You need clear access to the base of each leg where the round self-adhesive furniture glide will sit.
Use a steel rule or calipers. Measure straight across the widest point of the leg base. For turned legs that taper, measure at the very bottom — the actual contact point with the floor.
Select the round self-adhesive furniture glide whose range includes your measurement. When a measurement falls exactly on a boundary (e.g., 38 mm), choose the larger size for full edge coverage.
Installing round self-adhesive furniture glides takes under a minute per leg. No tools required. The EHBF acrylic foam tape bonds to wood, metal, plastic, and most composite surfaces.
These round self-adhesive furniture glides for hard floors use a chemically inert PA6 surface that does not react to floor sealers, waxes, or cleaning solutions. The National Wood Flooring Association (NWFA) recommends placing protective glides on all furniture legs as a primary measure for maintaining hardwood floor condition. For a full overview of hard floor types and their care requirements, The Spruce’s hard flooring guide provides a useful reference.
Every component in these round self-adhesive furniture glides for hard floors is specified for a particular engineering reason. PA6 polyamide belongs to the family of high-performance engineering polymers — the same material class used in mechanical bearings and gears for its combination of low friction, high wear resistance, and dimensional stability.
1,450 g/m² pile density. PA6 fibers are forced through the base material by thousands of barbed needles during manufacturing — each fiber is mechanically interlocked, not glued. This is what makes PA6 round self-adhesive furniture glides survive the lateral shear forces that destroy cheap felt pads: there’s no adhesive layer to weaken, no compressed layers to separate under load.
The result is round self-adhesive furniture glides for hard floors that stay intact and low-friction across years of daily chair movement. The NWFA’s hardwood floor maintenance guidelines cite abrasion from degraded furniture glides as one of the leading causes of preventable hardwood floor finish damage.
Closed-cell acrylic foam tape — the same adhesive technology used in automotive exterior trim and architectural glazing where permanent, vibration-resistant bonds are required. EHBF conforms to micro-texture on the leg surface, creating mechanical interlock in addition to chemical adhesion.
The foam core absorbs lateral shear forces and vibration that would cause rigid adhesives to crack and fail. This is what makes round self-adhesive furniture glides stay attached under the repeated push-pull forces of daily chair movement — the foam flexes with the force instead of fracturing against it.
The rigid platform that carries both the PA6 surface and the EHBF adhesive layer. ABS is the same engineering-grade thermoplastic used in automotive interiors and electronics housings — not the commodity plastic in cheap glides that age-crack within a year under sustained load.
Cheap felt pads use horizontally-layered fibers bonded with weak adhesive. The bond weakens with moisture, the layers separate under lateral shear, and the felt compresses flat and traps grit that scratches your floor with every movement.
PA6 round self-adhesive furniture glides for hard floors have no adhesive layer between fibers: they are mechanically interlocked by needle-punching and cannot separate. The vertical fiber orientation deflects debris instead of trapping it. And EHBF acrylic foam tape outperforms the cheap adhesive backing on felt pads by an order of magnitude — cheap felt peels off in weeks, EHBF holds for years.
Use round nail-on furniture glides when the legs are solid wood and the furniture moves frequently — the mechanical rivet provides the strongest possible connection. Use round self-adhesive furniture glides when the legs are metal, plastic, hollow, or any material that cannot accept a nail-on rivet.
Both use the same PA6 surface and ABS platform. The only difference is the attachment method: tubular rivet for solid wood, EHBF adhesive for everything else.
Rubber leg caps slide over the end of the leg and rely on friction fit to stay in place. On smooth, finished surfaces — chrome, powder-coated steel, polished wood — that friction fit loosens quickly. A rubber cap that falls off a furniture leg in a commercial environment is both a liability and a maintenance headache.
Round self-adhesive furniture glides for hard floors bond directly to the leg base face. They cannot slip off, fall off, or loosen over time. The PA6 surface provides quieter, smoother movement than rubber, and will not stain or mark finished floors the way rubber caps can.
Round self-adhesive furniture pads use the same PA6 needle-punched surface but without the ABS platform. They attach directly to the leg base with EHBT fiberglass mesh adhesive tape. Pads are available in 33 diameters from Ø 12 mm to Ø 300 mm — a much wider range than the five glide sizes.
Glides are the stronger option for high-use furniture like dining chairs that move hundreds of times a day. The ABS platform provides structural rigidity, and the EHBF foam tape provides a more robust connection than mesh adhesive alone. For furniture that moves less frequently — tables, bookcases, cabinets — pads provide excellent protection with the widest size selection available.
Round self-adhesive furniture glides come in two surface variants. The right choice depends on how the furniture is used — not the floor type.
For furniture that is regularly repositioned. The low-friction PA6 surface on these round self-adhesive furniture glides for hard floors moves quietly across hardwood, tile, laminate, vinyl, and stone with minimal effort. The standard choice for dining chairs, desk seating, and accent furniture where ease of movement is the priority.
NR+CR (Natural Rubber + Neoprene) at 30 Shore A provides controlled grip. Furniture stays exactly where it’s placed. Use these for accent furniture, display pieces, restaurant tables, boat cabin furniture, or any environment where an unexpected slide is a safety hazard.
Both variants use the same ABS platform and EHBF adhesive tape. Only the sliding surface differs.
Self-adhesive furniture glide shape must match the leg cross-section exactly. A round glide on a square leg leaves the corners unprotected and the overhanging edges catch during movement. Measure the base before ordering.
For circular cross-section legs — turned, tapered, cylindrical, and tubular steel. The round self-adhesive furniture glides range covers Ø 23 / 28 / 38 / 50 / 75 mm.
For equal-sided square legs. Full corner-to-corner protection that round glides cannot provide on square legs.
For oblong legs and sled frame contact points — mid-century modern, Scandinavian, and contemporary furniture design.
Round self-adhesive furniture glides for hard floors work on dining chairs, kitchen chairs, desk chairs, accent chairs, bar stools, side tables, coffee tables, and any furniture with round legs on smooth hard floors. Especially useful for metal and plastic furniture legs that cannot accept nail-on rivets. The Ø 28 mm and Ø 38 mm sizes cover the vast majority of residential dining and kitchen chairs.
Restaurant dining chairs, hotel room furniture, conference room seating, office guest chairs, healthcare facility seating, school and classroom chairs, metal stacking chairs, and event venue furniture. Round self-adhesive furniture glides for hard floors are the standard choice for commercial metal-legged furniture — EHBF bonds to chrome, powder-coated steel, and anodized aluminum without tools. Available in bulk quantities — visit Business Solutions for commercial pricing.
Identical ABS platform and EHBF adhesive. NR+CR rubber surface instead of PA6 — for furniture that must hold position on hardwood, tile, or polished concrete.
Same PA6 sliding surface. Zinc-plated tubular rivet instead of adhesive — the strongest possible connection for solid wooden furniture legs under heavy daily use.
| Specification | Details |
|---|---|
Product Type |
Round Self-Adhesive Furniture Glides |
Shape |
Round |
Materials |
PA6 needle-punched surface, ABS base plate, EHBF acrylic foam adhesive |
Pile Density |
1,450 g/m² |
Fit Style |
Self-adhesive — peel and press, no tools required |
Leg Compatibility |
Wood, metal, and plastic legs with a flat base |
Floor Compatibility |
All hard floors — hardwood, laminate, vinyl, tile, stone, concrete, cork, linoleum |
Furniture Compatibility |
Chairs, stools, tables, sofas, and all solid wood-leg or metal-leg furniture |
Sizes Available |
Ø 23 mm – Ø 75 mm (0.91″ – 2.95″) |
Color Options |
Black |
Installation Type |
Clean surface, peel backing, press firmly 30 sec, cure 24 hrs |
Indoor/Outdoor Use |
Indoor | Covered Outdoor |
| Shape | Ø (Diameter) | Compatible Leg/Base Size | H (Height) |
|---|---|---|---|
Round |
28 mm (1.10") |
23 – 27 mm (0.91 – 1.06″) |
12 mm (0.47") |
Round |
28 mm (1.10") |
28 – 37 mm (1.10 – 1.46″) |
12 mm (0.47") |
Round |
38 mm (1.50") |
38 – 49 mm (1.50 – 1.93″) |
12 mm (0.47") |
Round |
50 mm (1.97") |
50 – 74 mm (1.97 – 2.91″) |
12 mm (0.47") |
Round |
75 mm (2.95") |
75 mm + (2.95″) |
12 mm (0.47") |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet