Rectangular self-adhesive furniture glides protect smooth, hard floors from scratches. Full end-to-end PA6 coverage for rectangular legs. EHBF acrylic adhesive bonds to metal, plastic, chrome, and wood. No drilling, no tools. Peel-and-stick chair leg protectors that bond on contact. One size: 33 × 19 mm, fits legs up to 40 × 25 mm.
Not sure what size? See the size chart ↓
📦 Sold in packs of 4 — quantity adjustable at checkout
Rectangular metal legs, sled frames, and hollow tube rails can’t accept a nail-on rivet. But they still need the same end-to-end PA6 protection that keeps hardwood, tile, laminate, and vinyl scratch-free.
Rectangular self-adhesive furniture glides use EHBF (red) acrylic foam adhesive to bond a PA6 needle-punched fiber surface to any clean, smooth rectangular leg. Silent, low-friction movement on every smooth, hard floor. Peel-and-stick floor protectors for mid-century and Scandinavian furniture where a rivet isn’t an option.
Peel the backing, align the long axis, press firmly for 30 seconds. Allow 48 hours for full adhesive cure before heavy use. The EHBF adhesive builds bond strength progressively over 24 hours under the furniture’s own weight.
Rectangular self-adhesive furniture glides come in one precision size: 33 × 19 mm, fitting rectangular legs up to 40 × 25 mm. Self-adhesive floor protectors for rectangular legs on every smooth, hard floor. For any leg material. Sold in packs of 4.
Rectangular self-adhesive furniture glides are made in one size. Rectangular furniture legs cluster tightly around a narrow dimensional range, so a single product covers the vast majority of applications.
Fits legs 33 × 19 mm to 40 × 25 mmMid-century, Scandinavian, transitional, sled-base, and contemporary furniture with rectangular legs
If your rectangular leg exceeds 40 × 25 mm, rectangular self-adhesive furniture pads offer in 6 width groups for an exact dimensional match.
For solid wood legs, rectangular nail-on furniture glides use a tubular rivet instead of adhesive. For anti-slip grip, rectangular anti-slip self-adhesive furniture glides use NR+CR rubber. For bulk orders, visit Business Solutions.
Measure the leg base to find the right size. Rectangular legs have two different dimensions: length and width. You need both numbers.
Lay the piece on its side or turn it upside down. You need full access to the flat bottom face of each leg where the rectangular self-adhesive furniture glide will bond.
Place a ruler across the longer edge of the leg base. Record in millimeters. Then measure the shorter edge. If both sides are equal, the leg is square. Use square self-adhesive furniture glides instead.
On sled-base furniture, measure each contact point individually. As long as all points fall within 33–40 mm × 19–25 mm, the same glide fits every contact point.
No tools. No drilling. No hardware. Every rectangular self-adhesive furniture glide comes with EHBF (red) adhesive pre-applied.
Peel the backing, align the long axis, press firmly. The whole job takes less time than reading this section.
PA6 is chemically inert and leaves no marks, scuffs, or residue on any sealed floor finish. The National Wood Flooring Association (NWFA) recommends furniture protectors on every leg as a primary hardwood maintenance step.
Rectangular self-adhesive furniture glides deliver silent, low-friction movement without scratching. These hardwood floor protectors are built for long-term performance on every surface listed below.
Three components work together in every rectangular self-adhesive furniture glide. One touches your floor. One bonds the glide to your furniture leg. One sits between them and distributes the load.
PA6 fibers are forced through the base material by thousands of barbed needles during manufacturing. Each fiber is mechanically interlocked with its neighbors. No glue holding it together. No layers to separate.
The result is a dense, low-friction surface (1,450 g/m² pile density) that glides silently across any sealed smooth, hard floor without scratching, scuffing, or leaving marks. Unlike cheap felt pads that compress and trap grit, PA6 deflects debris and maintains its smooth surface through extended daily use.
EHBF is a double-sided self-adhesive acrylic foam tape that bonds the ABS platform to any smooth leg surface. Unlike commodity double-sided tape that peels under lateral stress, EHBF builds bond strength progressively under the furniture’s own weight.
On rectangular legs, the long contact edge amplifies peeling forces. EHBF’s shear strength handles this without letting go.
The rigid rectangular disc between the PA6 surface and the EHBF adhesive distributes compression load evenly across the full rectangular footprint. No stress concentration at the narrower ends, no curling or bowing under asymmetric weight.
Rectangular legs are the hardest shape to protect with generic products. Most peel-and-stick glides on the market are round, and a circle on a rectangle leaves both long edges exposed. Here’s how rectangular self-adhesive furniture glides compare.
A circle inscribed in a rectangle leaves both long edges and both narrow ends exposed past the glide. Those unprotected sections bear directly on the floor.
Rectangular self-adhesive furniture glides match the full footprint end to end, edge to edge. Full PA6 coverage means full floor protection.
Felt compresses flat under load, absorbs moisture from floor cleaning, and traps abrasive grit. On rectangular legs, felt strips compress unevenly along the long edges. The center compresses first, then the edges curl and peel.
PA6 needle-punched fiber can’t compress flat, doesn’t absorb moisture, and deflects debris instead of trapping it. EHBF acrylic foam adhesive resists the creep that peels cheap felt off furniture legs.
Same PA6 surface, same ABS platform, same rectangular geometry. The difference is the attachment method. Rectangular nail-on furniture glides use a tubular rivet for solid wood, providing the strongest possible mechanical bond.
Rectangular self-adhesive furniture glides use EHBF (red) adhesive for metal, plastic, chrome, hollow tube, or any leg where a rivet isn’t possible. Choose based on leg material.
Same ABS platform, same adhesive, same size. Opposite function. Rectangular anti-slip self-adhesive furniture glides use NR+CR rubber for furniture that must stay put. Rectangular self-adhesive furniture glides use PA6 for furniture that needs to move freely. Choose based on the job: movement or grip.
Rectangular self-adhesive furniture glides are built on the same ABS platform and adhesive system used across the self-adhesive line. The only difference is the contact surface, which determines whether furniture moves freely or holds position.
Low-friction PA6 fiber for rectangular-legged furniture that repositions regularly. Mid-century dining chairs, Scandinavian side chairs, sled-frame seating on metal, plastic, or hollow tube legs. These are the mid-century chair glides you are viewing now.
Controlled end-to-end grip for rectangular-legged furniture that must stay put. Mid-century accent tables, display furniture, and any rectangular-legged piece where sliding is a problem or safety concern.
Both variants use the same ABS platform and acrylic adhesive. Only the floor-contact surface differs: PA6 for movement, NR+CR for grip.
The glide shape must match the leg cross-section. All three Smooth Glide shapes use the same PA6 surface, ABS platform, and acrylic adhesive.
For circular, turned, tapered, and cylindrical legs. from Ø 23 mm to Ø 75 mm.
For equal-sided square legs. Full corner-to-corner PA6 coverage. from 23 × 23 mm to 75 × 75 mm.
For rectangular legs with unequal sides. Full end-to-end PA6 coverage. 33 × 19 mm.
Any situation where rectangular non-wood legs meet smooth, hard flooring, and the furniture needs to move freely. These are the professional-grade peel-and-stick furniture floor protectors for mid-century and Scandinavian furniture on metal, plastic, and composite frames when felt pads fail, rubber caps drag, and nail-on rivets aren’t possible.
Mid-century modern dining chairs with metal rectangular legs on hardwood are the single most common residential application. Scandinavian side chairs on tile or laminate. Metal sled-frame furniture on vinyl. Display shelving with rectangular bases.
The 33 × 19 mm size fits the compact rectangular contact points found on vintage and reproduction mid-century designs. Self-adhesive chair leg protectors that install in seconds and hold long-term.
Boutique restaurants with mid-century or Scandinavian-inspired seating on hardwood or polished concrete. Hotel lobbies, design studios, gallery spaces, and showrooms where furniture aesthetics matter.
Available in bulk for venue fit-outs. For commercial pricing, visit Business Solutions.
Identical PA6 surface and ABS platform. ZnFe tubular rivet instead of EHBF adhesive, for solid wood rectangular legs where maximum mechanical hold is preferred.
Same ABS platform and acrylic adhesive. NR+CR rubber surface instead of PA6, for rectangular-legged furniture that must hold position on smooth, hard floors.
| Specification | Details |
|---|---|
Product Type |
Self-Adhesive Furniture Glides |
Shape |
Rectangular |
Surface Material |
PA6 Needle-Punched Polyamide 6 |
Platform Material |
ABS Acrylonitrile Butadiene Styrene |
Adhesive |
EHBF Extra High Bond Foam Acrylic Tape |
Pile Density |
1,450 g/m² |
Leg Compatibility |
Solid wood, metal, and plastic legs |
Floor Compatibility |
Smooth, hard floors |
Sizes Available |
33 × 19 mm (1.30″ × 0.75″) |
Pack Quantity |
Sold in multiples of 4 |
Color |
Black |
Installation |
Press firmly for 30 seconds. Allow 48 hours before heavy use |
Indoor/Outdoor Use |
Indoor | Covered Outdoor |
| L × W (Size) | Compatible Leg Size | H (Height) | Weight |
|---|---|---|---|
33 × 19 mm (1.30″ × 0.75″) |
33 – 40 × 19 – 25 mm (1.30 – 1.57″ × 0.75 – 0.98″) |
12 mm (0.47") |
3.53 g |
A round glide inscribed inside a rectangular leg leaves both long edges and both narrow ends exposed. Those unprotected sections bear directly on the floor, especially along the long axis where rectangular legs carry the most weight. Rectangular self-adhesive furniture glides match the full footprint end to end, edge to edge, so every millimeter is protected by PA6 fiber.
Rectangular self-adhesive furniture glides come in one precision size: 33 × 19 mm. They fit rectangular legs from 33 × 19 mm up to 40 × 25 mm, which covers the vast majority of mid-century, Scandinavian, transitional, and contemporary rectangular legs. If your leg exceeds 40 × 25 mm, rectangular self-adhesive furniture pads offer in 6 width groups for an exact dimensional match.
EHBF acrylic adhesive bonds to wood, steel, aluminum, chrome, stainless steel, plastic, powder-coated metal, and composite materials. This makes rectangular self-adhesive furniture glides the right choice for metal sled-base furniture, chrome-legged mid-century chairs, and plastic or composite frames where a nail-on rivet isn’t possible. The adhesive builds bond strength progressively over 24 hours.
Both use the same ABS platform and acrylic adhesive. The difference is the floor-contact surface. Rectangular self-adhesive furniture glides (Smooth Glide) use low-friction PA6 fiber for furniture that needs to move freely, like mid-century dining chairs. Rectangular anti-slip self-adhesive furniture glides use NR+CR rubber for furniture that must stay put, like accent tables. Choose based on the job: movement or grip.
Measure the flat contact area at the base of each runner, not the tube cross-section. Clean each contact point with isopropyl alcohol. Peel the backing, align the glide’s long edge with the runner’s long edge, and press firmly for 30 seconds. If the sled frame has multiple contact points per side, each point needs its own glide. The EHBF adhesive reaches full bond strength after 24 hours under the furniture’s own weight.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet