Ships nationwide · In-stock and made-to-order sizes
Ships nationwide · In-stock and made-to-order sizes
On carpet, a bare wood chair leg drags and digs into the pile. This caps it in hard ABS that skims over the pile with zero fiber engagement, cutting drag and sparing the carpet from tears and dents. The same hard face handles rough hard floors: slate, brick, and grout lines. A zinc-plated rivet with an anti-rotation notch taps into solid wood and locks in place. For solid wood legs only.
Buying in volume? See business pricing & samples ↓
The difference
Carpet needs a face that rides over the pile, not one that digs into it.
| What matters | Felt pad or plain plastic cap | Superior Glide |
|---|---|---|
| On the carpet | Felt locks into the pile; plastic caps dig an edge in. The chair judders instead of sliding. | A smooth, hard ABS face that rides over the pile and across grout lines. |
| How it stays on | Glued felt peels; a single nail works loose. | Tubular rivet or extra-high-bond adhesive, matched to the leg. |
| Sizing | One size covers everything, badly. | Sized to the leg base so the edge never catches. |
| When it wears | Replace and re-glue. | Refits in the same spot. 90-day warranty. |
In more detail
Carpet fights every furniture movement. The pile grabs, drags, and resists, making chairs hard to pull back, tables impossible to reposition, and cleaning a constant struggle. Round furniture sliders for carpet, sold here as nail-on slides, put a hard ABS face under the leg so it rides over the pile.
Round nail-on furniture slides solve this with a hard ABS surface that slides over carpet pile instead of digging into it. Where PA6 glides are designed for smooth, hard floors, these carpet furniture slides use a precision-formed ABS face that presents zero fiber engagement.
The slide skims across the top of the pile rather than sinking into it.
A zinc-plated tubular rivet drives into solid wood legs with a rubber mallet. An anti-rotation notch molded into the rivet locks the slide in place and prevents it from spinning under load. No pre-drilling, no adhesive, no curing time.
Round nail-on furniture slides come in from Ø 23 mm to Ø 50 mm. For solid wood legs only.
The most common mistake when ordering chair slides for carpet is guessing the leg size. A slide that's too small leaves the leg perimeter in direct contact with the carpet pile, defeating the entire purpose.
Step 1: Flip or tilt the furniture
Lay the piece on its side or turn it upside down. You need clear access to the base of each leg where the round nail-on furniture slide will sit.
Step 2: Measure the diameter
Use a ruler or calipers across the widest point of the leg base. For turned legs that taper, measure at the very bottom. A mid-leg measurement on a tapered leg will give you the wrong size.
Step 3: Match to the size chart
Select the round nail-on furniture slide whose range includes your measurement. A Ø 32 mm leg falls within the Ø 28 mm slide option (fits legs Ø 28–37 mm). If you're right on a boundary, go with the smaller size so the slide stays slightly inside the leg edge.
Tapered legs: always measure at the very bottom. A tapered leg that measures Ø 40 mm at mid-height but Ø 33 mm at the base needs the Ø 28 mm slide, not the Ø 38 mm. Round nail-on furniture slides sized to the bottom diameter ensure the ABS surface sits flush under the leg without overhanging.
Installation takes under a minute per leg. No pre-drilling required on any hardwood, MDF, or softwood species.
The zinc-plated tubular rivet separates wood fibers without removing them. This creates the strongest connection method for furniture that sits on carpet, where lateral drag forces are higher than on smooth, hard floors.
What you need
Installation steps
Removal and replacement: Pry gently from one edge with a flat-head screwdriver or putty knife. The tubular rivet separates cleanly from the wood fibers. A new round nail-on furniture slide seats firmly in the same hole without any loss of grip. You can also swap to round nail-on furniture glides in the same hole if the furniture moves to a smooth, hard floor.
Carpet and smooth, hard floors present opposite challenges. Smooth, hard floors require soft PA6 fiber to glide silently without scratching. Carpet has too much friction: furniture legs sink into the pile, engage thousands of fibers, and resist every push and pull.
How carpet resists furniture movement
The carpet pile is designed to grip. Every fiber stays upright, provides cushion, and resists compression. When an unprotected furniture leg sits on carpet, it sinks into the pile and engages thousands of individual fibers.
Moving that furniture requires force to overcome the pile's resistance: force that tears fibers, crushes the pile flat, and strains your back. The Carpet and Rug Institute (CRI) recommends furniture protectors on all legs to prevent premature pile damage.
How ABS slides solve the problem
The ABS surface on the these slides is hard, smooth, and presents zero fiber engagement. Instead of sinking into the pile, the ABS face sits on top and skims across it.
The friction between smooth ABS and carpet is dramatically lower than between raw wood and carpet, turning a two-handed pull into a one-handed push. ABS also distributes weight across the full circular footprint, reducing the pile compression that causes deep indentations under unprotected legs.
✓ Use on
✗ Not the right product for
Carpet and rug compatibility
These slides work on any surface where furniture legs sink into or engage the material. The hard ABS face skims over the surface instead of engaging it.
Also recommended for rough or heavily textured hard floors where PA6 glides catch or wear prematurely.
Cut pile carpet: all weights and densitiesLoop pile and berber carpetCommercial carpet tileArea rugs over hard floorsSisal, jute, and natural fiber rugsOutdoor carpet and artificial turfRough hard floors: unsealed concrete, textured tile, natural cleft stone
Round nail-on furniture slides and round nail-on furniture glides use the same platform and rivet. The right choice depends entirely on the floor type, not the furniture.
ABS: These slides
For carpet, carpet tile, area rugs, and rough-textured hard floors. The hard ABS surface skims over the carpet pile instead of engaging it. These are the carpet furniture slides you are viewing now.
You are viewing this product.PA6: Round Nail-On Furniture Glides
For hardwood, tile, laminate, vinyl, stone, and all smooth, hard floors. The soft PA6 needle-punched surface moves silently without scratching. Glides protect the floor from the furniture. Slides protect the carpet from the furniture.
Both variants use the same ABS platform and ZnFe tubular rivet. Only the floor-contact surface differs. ABS for carpet, carpet tile, and rugs. PA6 for smooth, hard floors.
The slide shape must match the leg cross-section. A round slide on a square leg leaves all four corners exposed to catch and snag on carpet fibers.
These slides ← You are here.
For circular, turned, tapered, and cylindrical legs. from Ø 23 mm to Ø 50 mm.
Square Nail-On Furniture Slides
For equal-sided square legs. Full corner-to-corner ABS coverage on carpet.
View square nail-on furniture slides →
Rectangular Nail-On Furniture Slides
For rectangular legs. Mid-century modern and Scandinavian furniture. 33 × 19 mm.
Measure the widest point of the flat base of the leg, then choose the size on that row. The glide should sit flush with the leg or just inside it, never wider.
| Diameter (Ø) | Fits legs measuring |
|---|---|
| Ø 23 mm (0.91″) | 23 to 27 mm (0.91″ to 1.06″) |
| Ø 28 mm (1.10″) | 28 to 37 mm (1.10″ to 1.46″) |
| Ø 38 mm (1.50″) | 38 to 49 mm (1.50″ to 1.93″) |
| Ø 50 mm (1.97″) | 50 to 65 mm (1.97″ to 2.56″) |
Measure the flat base of the leg and choose the size in that row. The slide sits flush with the leg base or just inside it, never wider. On carpet a slide has to float on the pile, so coverage matters: a slide much smaller than the leg sinks in. 50 mm is the largest slide made, so legs over 65 mm (2.56″) are not covered by this line.
One sheet covers round, square, and rectangular legs, for both nail-on and self-adhesive versions.
Printable size guide (PDF)Print at 100% actual size, then hold your leg against each shape.
| Specification | Detail |
|---|---|
| Material | Zinc-plated steel rivet, ABS |
| Sizes | 23, 28, 38, 50 mm |
| Head height (H) | 7.6 mm (0.30″) |
| Rivet length (H1) | 5.5 mm (0.22″) |
| Rivet Ø (Ø1) | 9.2 mm (0.36″) |
| Mounting | Zinc rivet, tapped in with a rubber mallet |
| Colors | Black |
| Floor compatibility | Carpet, carpet tile, area rugs, and rough hard floors |
Yes. The smooth ABS surface sits on top of the pile regardless of pile height. On thick shag, the slide may sink slightly into the pile under heavy furniture, but it still provides dramatically easier movement than bare wood legs. The ABS face cannot interlock with fibers the way felt, rubber, or bare wood does.
Yes. The tubular rivet parts wood fibers on entry rather than boring them out. When you remove a slide, the fibers spring back. A fresh rivet, whether carpet slide (ABS), Smooth Glide (PA6), or Anti-Slip (NR+CR), grips firmly in the same hole. Swap as often as your flooring changes.
Round nail-on furniture slides are available in Ø 23, 28, 38, and 50 mm. Most furniture with legs Ø 75 mm and above uses metal or composite frames that cannot accept a nail-on rivet. For those legs, use round self-adhesive furniture slides instead.
They reduce indentation significantly by distributing the furniture’s weight across the full ABS disc instead of concentrating it on the small leg base. Deep indentations happen when a narrow leg presses into pile under heavy load. The wider contact area of the slide spreads that load and reduces pile compression.
Yes, ABS can scratch smooth, hard floors. If your furniture moves between carpet and smooth, hard floors, swap to round nail-on furniture glides (PA6 surface) when the furniture is on smooth, hard floors. Both fit the same rivet hole. Do not drag ABS slides across hardwood, tile, or laminate.
Round Nail-On Furniture Slides
For business
Same glide, by the hundred or the thousand. Volume pricing, free samples to check the fit, and a written quote for the project.
Every size, in one place
Dimensions, materials, load ratings and part numbers for the whole range: glides, slides, pads, tube plugs, threaded inserts, leveling feet and sled base glides. Millimeters and inches side by side, with a drawing for every part.
Reviews
There are no reviews yet