Hospitality-grade floor protection · Sizing help before you order · Apply for a business account
Sizing help · Apply for a business account
Hospitality-grade floor protection · Sizing help before you order · Apply for a business account
Sizing help · Apply for a business account
Under a piano or a heavy table, a single-layer pad crushes flat and quits protecting. This one runs 11 mm of PA6 needle-punched fiber, more than double the standard build, with the same silent, low-friction surface. EHBT fiberglass mesh adhesive sticks it down with no tools. For smooth, hard floors.
We make this size in production runs, so there is none on the shelf today. Tell us how many you would want and you go on the list for it. When enough people ask for a size, we run it, and the people who asked hear about it first.
Buying in volume? See business pricing & samples ↓
Heavy furniture destroys Single-Layer pads. The weight compresses Single-Layer pad fiber flat, grinds through the surface, and leaves the raw leg sitting on your floor within months. Round heavy-duty self-adhesive furniture pads solve this with 11 mm thick PA6 needle-punched fiber, more than double the Standard construction. Same silent, low-friction surface. Built to survive under pianos, commercial dining tables, hotel lobby furniture, heavy cabinets, and anything that weighs enough to crush Single-Layer pads flat. Round heavy-duty furniture pads are built for that weight.
from Ø 30 mm to Ø 300 mm. No small sizes because the furniture that needs heavy-duty protection doesn’t have small legs. If you have been cycling through heavy-duty felt pads for heavy furniture that compress flat within weeks, round heavy-duty self-adhesive furniture pads are the upgrade. Heavy-duty furniture pads for hardwood floors, tile, laminate, vinyl, and stone that actually last under extreme weight. EHBT (yellow) fiberglass mesh acrylic adhesive bonds to wood, metal, and plastic legs with no tools and no hardware.
Same process as Single-Layer pads, but the measurement matters more under heavy loads. An oversized round heavy-duty self-adhesive furniture pad peels faster because the adhesive at the edges has no leg surface to bond to. With at 10 mm increments, there is a near-exact match for every heavy round leg.
Heavy furniture may need two people to tilt safely. You need a clear look at the bottom of each leg: the flat surface where the round heavy-duty self-adhesive furniture pad will bond.
Straight across the widest point of the round base, in millimeters. A ruler or tape measure works. Millimeter precision is all you need to find the closest match in the 28-size range.
If your measurement falls between two sizes, go smaller. A round heavy-duty self-adhesive furniture pad that sits inside the footprint stays bonded under heavy load. One that overhangs peels under its own weight.
Same peel-and-press installation as Single-Layer pads. No tools. No drilling. Every round heavy-duty self-adhesive furniture pad comes with EHBT fiberglass mesh acrylic adhesive already applied. The one advantage of heavy furniture: the extra weight actually accelerates the adhesive cure. More downforce means a stronger bond, faster.
Same chemically inert PA6 surface as all our pads. It won’t react with floor sealers, wax, or cleaning products. The National Wood Flooring Association (NWFA) recommends protective pads on all furniture legs as a first line of defense for hardwood. Round heavy-duty self-adhesive furniture pads meet that standard across every smooth, hard floor type listed below.
Three versions. Same PA6 surface on all three. Same floor protection. The difference is underneath, and choosing the right one comes down to the furniture’s weight and whether vibration is a concern.
PA6 surface + EHBT adhesive. Thinnest profile and widest size range: 33 diameters starting at Ø 12 mm. For most residential furniture on flat, level floors at normal weight.
11 mm thick PA6 construction + EHBT adhesive. Round heavy-duty self-adhesive furniture pads for pianos, heavy tables, commercial furniture, and anything that crushes Single-Layer pads flat. from Ø 30 mm to Ø 300 mm.
PA6 surface + EVA closed-cell foam layer + EHBT adhesive. Dampens vibration and absorbs impact noise from speakers, subwoofers, and equipment. from Ø 18 mm to Ø 300 mm.
All three versions protect smooth, hard floors equally well. Standard for everyday weight. Heavy-duty for extreme weight. Foam for vibration and noise.
Match the pad shape to the leg shape. All three heavy-duty shapes use the same 11 mm PA6 construction. The only difference is the outline.
These pads for round legs on heavy furniture. from Ø 30 mm to Ø 300 mm.
For square legs on heavy furniture. from 20 × 20 mm to 300 × 300 mm.
For rectangular legs and sled bases on heavy furniture. across multiple width groups.
It was scratched by the pad you put there to protect it. Here is how that happens, and what we do differently.
It picks up sand and grit from the floor and holds it there. Every time the chair moves, that grit is dragged across the finish. The pad is still doing its job, and it is the thing causing the damage.
Vertical fiber, not a flat mat. It does not trap debris the way flat felt does, and it holds its thickness under a loaded sofa or bookcase.
| What happens | Cheap felt pad | Superior Glide |
|---|---|---|
| Structure | Flat, matted fiber with an open surface | PA6 needle-punched fiber |
| Grit | Absorbs it and holds it against the floor finish | Does not trap debris the way flat felt does |
| Under weight | Compresses, and stays compressed | Built to take repeated movement without compressing flat |
| Staying on | Hardware-store pressure-sensitive backing creeps under sideways load and lets go at the leg face | EHBT fiberglass mesh. Clean the leg, peel, press for 30 seconds, allow 48 hours to cure |
| Fit | An assortment pack, and you hope one size lands | Sized to your leg. Measure the base, order the size that sits flush or just inside it |
| Floor match | Sold as suitable for every floor | Matched to your floor. PA6 fiber for smooth hard floors, ABS for carpet and rough floors |
These pads are for smooth hard floors and furniture that mostly stays put. For chairs that get dragged daily, furniture glides are the better fit.
| Size (Ø) | Fits legs measuring |
|---|---|
| Ø 30 mm (1.18″) | 30 to 39 mm (1.18″ to 1.54″) |
| Ø 40 mm (1.57″) | 40 to 49 mm (1.57″ to 1.93″) |
| Ø 50 mm (1.97″) | 50 to 59 mm (1.97″ to 2.32″) |
| Ø 60 mm (2.36″) | 60 to 69 mm (2.36″ to 2.72″) |
| Ø 70 mm (2.76″) | 70 to 79 mm (2.76″ to 3.11″) |
| Ø 80 mm (3.15″) | 80 to 89 mm (3.15″ to 3.50″) |
| Ø 90 mm (3.54″) | 90 to 99 mm (3.54″ to 3.90″) |
| Ø 100 mm (3.94″) | 100 to 109 mm (3.94″ to 4.29″) |
| Ø 110 mm (4.33″) | 110 to 119 mm (4.33″ to 4.69″) |
| Ø 120 mm (4.72″) | 120 to 129 mm (4.72″ to 5.08″) |
| Ø 130 mm (5.12″) | 130 to 139 mm (5.12″ to 5.47″) |
| Ø 140 mm (5.51″) | 140 to 149 mm (5.51″ to 5.87″) |
| Ø 150 mm (5.91″) | 150 to 159 mm (5.91″ to 6.26″) |
| Ø 160 mm (6.30″) | 160 to 169 mm (6.30″ to 6.65″) |
| Ø 170 mm (6.69″) | 170 to 179 mm (6.69″ to 7.05″) |
| Ø 180 mm (7.09″) | 180 to 189 mm (7.09″ to 7.44″) |
| Ø 190 mm (7.48″) | 190 to 199 mm (7.48″ to 7.83″) |
| Ø 200 mm (7.87″) | 200 to 209 mm (7.87″ to 8.23″) |
| Ø 210 mm (8.27″) | 210 to 219 mm (8.27″ to 8.62″) |
| Ø 220 mm (8.66″) | 220 to 229 mm (8.66″ to 9.02″) |
| Ø 230 mm (9.06″) | 230 to 239 mm (9.06″ to 9.41″) |
| Ø 240 mm (9.45″) | 240 to 249 mm (9.45″ to 9.80″) |
| Ø 250 mm (9.84″) | 250 to 259 mm (9.84″ to 10.20″) |
| Ø 260 mm (10.24″) | 260 to 269 mm (10.24″ to 10.59″) |
| Ø 270 mm (10.63″) | 270 to 279 mm (10.63″ to 10.98″) |
| Ø 280 mm (11.02″) | 280 to 289 mm (11.02″ to 11.38″) |
| Ø 290 mm (11.42″) | 290 to 299 mm (11.42″ to 11.77″) |
| Ø 300 mm (11.81″) | 300 mm (11.81″) and wider |
Choose the size flush with the leg base or slightly smaller, never larger.
| Specification | Detail |
|---|---|
| Material | PA6 polyamide fiber, EHBT fiberglass mesh mounting |
| Sizes | 28 sizes, 30 to 300 mm |
| Height (H) | 11 mm (0.43″) |
| Mounting | EHBT fiberglass mesh adhesive |
| Colors | Black |
| Floor compatibility | Smooth hard floors |
| Fitting | Clean the leg with 70% isopropyl alcohol, peel, press firmly for 30 seconds, allow 48 hours to cure. |
| Minimum order | Sold in a minimum of 4, then any quantity you need |
Round heavy-duty self-adhesive furniture pads use 11 mm thick PA6 needle-punched fiber, more than double the Standard construction. The extra depth gives the fiber structure room to absorb heavy loads without compressing down to the adhesive layer. Under a grand piano or a 200 kg commercial dining table, Standard pads wear through in months. The 11 mm construction handles those same loads with significantly longer service life.
Yes. Pianos are the single most common application. Measure the diameter of each caster cup base (not the caster wheel) and select the slightly smaller pad size. The 11 mm PA6 distributes the piano’s concentrated weight across the full pad surface, preventing compression marks and finish damage. For square piano feet, use square heavy-duty pads instead.
Furniture heavy enough to need 11 mm protection almost always has legs Ø 30 mm or larger. Small accent furniture and lightweight chairs do not generate enough load to justify extra thickness. For legs under Ø 30 mm, Standard round pads with starting at Ø 12 mm provide the right balance.
It helps. The EHBT fiberglass mesh acrylic adhesive bonds on contact under sustained downward pressure. Heavy furniture accelerates the cure. More weight means a stronger, faster bond. This is the one installation advantage of heavy furniture. Once the round heavy-duty self-adhesive furniture pad is pressed in place and the furniture set back down, the bond sets more quickly than it would under a lightweight chair.
Yes, and this is one of the primary commercial applications. The 11 mm PA6 construction handles heavy table weight and repeated lateral movement across tile, polished concrete, and other hard commercial floors. For bulk commercial pricing, visit Business Solutions. If the table has square or rectangular legs, use square or rectangular heavy-duty pads.
Round Heavy-Duty Self-Adhesive Furniture Pads
Outfitting a hotel, restaurant, school, healthcare facility, or large furniture build? Superior Glide supports volume orders with bulk pricing tiers, free physical samples, and dedicated quote pricing for accounts placing larger orders.
Bulk pricing tiers, net terms for qualified buyers, and dedicated support for facility managers and procurement teams.
Hold the product, test the fit, check the finish. We ship samples free so you can evaluate before committing to a full order.
For orders above standard volume tiers, we’ll prepare a custom quote with consolidated shipping and your account’s tier pricing.
Reviews
There are no reviews yet