Round heavy-duty self-adhesive furniture pads protect hardwood, tile, laminate, vinyl, stone, and every other smooth, hard floor under pianos, heavy tables, commercial furniture, and any piece that crushes Single-Layer pads flat. Made with 11 mm-thick PA6 needle-punched fiber, more than double the Standard construction. Same silent, low-friction surface. Same EHBT fiberglass mesh acrylic adhesive. Heavy-duty furniture pads for hardwood floors and every other sealed surface. Built for the loads that Single-Layer pads cannot handle. No tools, no hardware. Sold in packs of 4.
Not sure what size? See the size chart ↓
📦 Sold in packs of 4 — quantity adjustable at checkout
Heavy furniture destroys Single-Layer pads. The weight compresses Single-Layer pad fiber flat, grinds through the surface, and leaves the raw leg sitting on your floor within months. Round heavy-duty self-adhesive furniture pads solve this with 11 mm thick PA6 needle-punched fiber, more than double the Standard construction. Same silent, low-friction surface. Built to survive under pianos, commercial dining tables, hotel lobby furniture, heavy cabinets, and anything that weighs enough to crush Single-Layer pads flat.
from Ø 30 mm to Ø 300 mm. No small sizes because the furniture that needs heavy-duty protection doesn’t have small legs. If you have been cycling through heavy-duty felt pads for heavy furniture that compress flat within weeks, round heavy-duty self-adhesive furniture pads are the upgrade. Heavy-duty furniture pads for hardwood floors, tile, laminate, vinyl, and stone that actually last under extreme weight. EHBT (yellow) fiberglass mesh acrylic adhesive bonds to wood, metal, and plastic legs with no tools and no hardware. Sold in packs of 4.
Round heavy-duty self-adhesive furniture pads start at Ø 30 mm and go to Ø 300 mm across 28 diameters at 10 mm increments. Under heavy loads, sizing matters more than usual. An oversized pad peels faster because the adhesive at the overhanging edges has no leg surface to bond to. An undersized pad concentrates weight on a smaller area, accelerating wear through the 11 mm fiber.
Heavy dining chairs, commercial seating, solid wood accent furniture, bar stools that take daily punishment, and restaurant chairs dragged across tile hundreds of times a day. Round heavy-duty self-adhesive furniture pads in this range handle the medium legs that still carry serious weight.
Sizes: Ø 30, 40, 50, 60, 70, 75 mm
Commercial dining table pedestals, conference tables, hotel furniture, heavy cabinets, retail display fixtures, piano legs, equipment bases, and industrial furniture pedestals. Round heavy-duty self-adhesive furniture pads in the large sizes protect the bases that need 11 mm thick furniture pads the most.
Sizes: Ø 80, 90, 100, 110, 120, 130, 140, 150, 160, 170, 180, 190, 200, 210, 220, 230, 240, 250, 260, 270, 280, 290, 300 mm
For lightweight residential furniture, Standard round pads offer starting at Ø 12 mm in a thinner profile. For furniture that rocks or vibrates, round foam pads add EVA vibration dampening. For bulk orders, visit Business Solutions.
Same process as Single-Layer pads, but the measurement matters more under heavy loads. An oversized round heavy-duty self-adhesive furniture pad peels faster because the adhesive at the edges has no leg surface to bond to. With at 10 mm increments, there is a near-exact match for every heavy round leg.
Heavy furniture may need two people to tilt safely. You need a clear look at the bottom of each leg: the flat surface where the round heavy-duty self-adhesive furniture pad will bond.
Straight across the widest point of the round base, in millimeters. A ruler or tape measure works. Millimeter precision is all you need to find the closest match in the 28-size range.
If your measurement falls between two sizes, go smaller. A round heavy-duty self-adhesive furniture pad that sits inside the footprint stays bonded under heavy load. One that overhangs peels under its own weight.
Same peel-and-press installation as Single-Layer pads. No tools. No drilling. Every round heavy-duty self-adhesive furniture pad comes with EHBT fiberglass mesh acrylic adhesive already applied. The one advantage of heavy furniture: the extra weight actually accelerates the adhesive cure. More downforce means a stronger bond, faster.
Same chemically inert PA6 surface as all our pads. It won’t react with floor sealers, wax, or cleaning products. The National Wood Flooring Association (NWFA) recommends protective pads on all furniture legs as a first line of defense for hardwood. Round heavy-duty self-adhesive furniture pads meet that standard across every smooth, hard floor type listed below.
Round heavy-duty self-adhesive furniture pads use the same two components as Single-Layer pads, with one critical difference: 11 mm thick PA6 construction instead of the Standard thickness. Here is what each layer does and why the extra depth matters when serious weight sits on the legs.
The 11 mm construction provides enough fiber depth for heavy loads to compress into before reaching the adhesive backing. Under a 200 kg commercial table or a grand piano, standard-thickness PA6 wears through in months of daily use. The 11 mm PA6 on round heavy-duty self-adhesive furniture pads handles those loads without bottoming out. Each fiber is mechanically interlocked with its neighbors by thousands of barbed needles during manufacturing, not laminated with adhesive. The vertical fiber orientation deflects debris instead of trapping it.
Felt works the opposite way: horizontal layers bonded with adhesive that weakens under moisture and heavy load. Under extreme weight, felt compresses flat on day one and starts acting as sandpaper by week two. Unlike cheap pads that compress flat under heavy loads, the 11 mm thick furniture pads in this product maintain structure and low friction through extended heavy use.
The adhesive is even more critical in heavy-duty applications. The heavier the furniture, the more lateral force trying to shear the pad during movement. The EHBT adhesive on round heavy-duty self-adhesive furniture pads bonds on contact and resists the creep that peels commodity adhesive off furniture legs under sustained heavy load. The furniture’s own weight actually accelerates the cure, creating a stronger bond than you would get under lighter pieces.
If you have been comparing round heavy-duty self-adhesive furniture pads to Single-Layer pads, cheap felt, or cork, here is why the 11 mm PA6 construction is the only option for heavy furniture.
Standard round pads use standard-thickness PA6 that works perfectly for residential furniture at normal weight. But under heavy commercial tables, solid wood cabinets, stone-top furniture, and pianos, the Standard thickness wears through faster. Round heavy-duty self-adhesive furniture pads provide 11 mm of PA6 to match the weight. Single-Layer pads offer starting at Ø 12 mm for lightweight furniture. Heavy-duty starts at Ø 30 mm with because furniture heavy enough for the 11 mm construction almost always has legs Ø 30 mm or larger.
Heavy furniture and felt don’t mix. The weight compresses felt flat on day one. By week two, trapped grit acts as sandpaper under hundreds of kilos of downforce. By month two, the felt has separated and you are back to bare legs on bare floor. If you have been replacing heavy-duty felt pads for heavy furniture every few months, round heavy-duty self-adhesive furniture pads end that cycle. PA6 fibers resist compression, deflect debris, and maintain their 11 mm structure under loads that destroy felt before it has a chance to work.
Cork is brittle under any load. Under heavy furniture, it is catastrophic. The weight cracks the cork immediately, shedding particles that grind into the floor finish. PA6 needle-punched fiber in round heavy-duty self-adhesive furniture pads doesn’t crack, doesn’t crumble, and doesn’t shed particles. The 11 mm construction handles heavy loads without structural failure.
Round self-adhesive furniture glides add ABS platform rigidity, making them ideal for chairs that move frequently. But glides only come in up to Ø 75 mm. Round heavy-duty self-adhesive furniture pads come in up to Ø 300 mm, covering large pedestals, piano legs, and bases that glides cannot accommodate. For heavy furniture that mostly stays put, heavy-duty pads are the right choice.
Three versions. Same PA6 surface on all three. Same floor protection. The difference is underneath, and choosing the right one comes down to the furniture’s weight and whether vibration is a concern.
PA6 surface + EHBT adhesive. Thinnest profile and widest size range: 33 diameters starting at Ø 12 mm. For most residential furniture on flat, level floors at normal weight.
11 mm thick PA6 construction + EHBT adhesive. Round heavy-duty self-adhesive furniture pads for pianos, heavy tables, commercial furniture, and anything that crushes Single-Layer pads flat. from Ø 30 mm to Ø 300 mm.
PA6 surface + EVA closed-cell foam layer + EHBT adhesive. Dampens vibration and absorbs impact noise from speakers, subwoofers, and equipment. from Ø 18 mm to Ø 300 mm.
All three versions protect smooth, hard floors equally well. Standard for everyday weight. Heavy-duty for extreme weight. Foam for vibration and noise.
Match the pad shape to the leg shape. All three heavy-duty shapes use the same 11 mm PA6 construction. The only difference is the outline.
These pads for round legs on heavy furniture. from Ø 30 mm to Ø 300 mm.
For square legs on heavy furniture. from 20 × 20 mm to 300 × 300 mm.
For rectangular legs and sled bases on heavy furniture. across multiple width groups.
Anywhere heavy round-legged furniture sits on a smooth, hard floor. Round heavy-duty self-adhesive furniture pads are the upgrade when Single-Layer pads wear through too fast, or when you know from the start that the weight demands 11 mm PA6.
Pianos (grand and upright) are the single most common residential application for round heavy-duty self-adhesive furniture pads. Piano leg floor protectors need to handle concentrated weight on small contact areas without compressing flat, and the 11 mm PA6 construction does exactly that. Beyond pianos: solid wood dining tables, antique sideboards, heavy cabinets, stone-top tables, marble-top furniture, safes, and appliance feet. If Single-Layer pads have worn through under a particular piece, 11 mm heavy-duty pads are the answer.
Restaurant dining tables dragged every service. Hotel lobby furniture under constant use. Conference room tables. Healthcare facility furniture built to institutional weight standards. School cafeteria tables. Retail display fixtures. Commercial equipment bases. Round heavy-duty self-adhesive furniture pads are available in bulk for large commercial rollouts. For commercial pricing, visit Business Solutions.
These pads require almost no maintenance. The 11 mm PA6 construction handles heavy loads without the rapid degradation that thinner pads experience, but periodic inspection is still good practice. Check the pad surface every 6 to 12 months for embedded grit. Sand, gravel tracked in from outside, and dried food particles can lodge in the fiber and turn the pad into an abrasive under heavy downforce. A quick wipe with a damp cloth removes anything that has collected.
If a round heavy-duty self-adhesive furniture pad has come loose, peel it off, clean the leg base with isopropyl alcohol, and apply a replacement. Watch for wear at the center of the pad where the highest concentration of weight compresses the fiber first. A pad that shows a visible groove or thinning at the center is due for replacement. For commercial environments with heavy furniture across an entire facility, schedule pad inspections alongside regular floor maintenance. Replacing a worn pad costs a fraction of refinishing a damaged floor.
Round Single-Layer Pads: standard-thickness PA6 for normal-weight residential furniture. from Ø 12 mm.
Round Foam Pads: EVA foam layer for vibration dampening and noise reduction. from Ø 18 mm.
Round Self-Adhesive Furniture Glides: PA6 on ABS platform.
Round Nail-On Furniture Glides: PA6 on ABS platform with tubular rivet.
| Specification | Details |
|---|---|
Product Type |
Self-Adhesive Pads |
Pad Type |
Heavy-Duty |
Shape |
Round |
Materials |
Dual-layer PA6 (Polyamide 6) surface, EHBT (fiberglass mesh acrylic tape) adhesive |
Floor Compatibility |
Hardwood, tile, laminate, vinyl, polished concrete, stone |
Furniture Compatibility |
Chairs, stools, tables, cabinets, circular bases |
Leg Compatibility |
Round wooden, metal, and plastic furniture legs |
Sizes Available |
Ø 30 mm – 300 mm (1.18″ – 11.81″) |
Color Options |
Black |
Installation Type |
Peel backing and press onto clean leg surface (wipe with 70% isopropyl alcohol first) |
Key Benefits |
Heavy-duty protection, wear resistance, anti-vibration, waterproof bonding |
Indoor/Outdoor Use |
Indoor | Covered Outdoor |
| Shape | Ø, L x W (Size) | Compatible Leg/Base Size | H (Height) |
|---|---|---|---|
Round |
30 mm (1.18") |
30 – 39 mm (1.18 – 1.53″) |
11 mm (0.44”) |
Round |
40 mm (1.57") |
40 – 49 mm (1.57 – 1.93″) |
11 mm (0.44”) |
Round |
50 mm (1.97") |
50 – 59 mm (1.97 – 2.32″) |
11 mm (0.44”) |
Round |
60 mm (2.36") |
60 – 69 mm (2.36 – 2.71″) |
11 mm (0.44”) |
Round |
70 mm (2.76") |
70 – 74 mm (2.75 – 2.91″) |
11 mm (0.44”) |
Round |
80 mm (3.15") |
80 – 89 mm (3.14 – 3.50″) |
11 mm (0.44”) |
Round |
90 mm (3.54") |
90 – 99 mm (3.54 – 3.90″) |
11 mm (0.44”) |
Round |
100 mm (3.94") |
100 – 109 mm (3.93 – 4.29″) |
11 mm (0.44”) |
Round |
110 mm (4.33") |
110 – 119 mm (4.33 – 4.69″) |
11 mm (0.44”) |
Round |
120 mm (4.72") |
120 – 129 mm (4.72 – 5.08″) |
11 mm (0.44”) |
Round |
130 mm (5.12") |
130 – 139 mm (5.12 – 5.47″) |
11 mm (0.44”) |
Round |
140 mm (5.51") |
140 – 149 mm (5.51 – 5.87″) |
11 mm (0.44”) |
Round |
150 mm (5.91") |
150 – 159 mm (5.91 – 6.26″) |
11 mm (0.44”) |
Round |
160 mm (6.30") |
160 – 169 mm (6.30 – 6.65″) |
11 mm (0.44”) |
Round |
170 mm (6.69") |
170 – 179 mm (6.70 – 7.05″) |
11 mm (0.44”) |
Round |
180 mm (7.09") |
180 – 189 mm (7.09 – 7.44″) |
11 mm (0.44”) |
Round |
190 mm (7.48") |
190 – 199 mm (7.48 – 7.83″) |
11 mm (0.44”) |
Round |
200 mm (7.87") |
200 – 209 mm (7.87 – 8.23″) |
11 mm (0.44”) |
Round |
210 mm (8.27") |
210 – 219 mm (8.27 – 8.62″) |
11 mm (0.44”) |
Round |
220 mm (8.66") |
220 – 229 mm (8.66 – 9.01″) |
11 mm (0.44”) |
Round |
230 mm (9.06") |
230 – 239 mm (9.05 – 9.41″) |
11 mm (0.44”) |
Round |
240 mm (9.45") |
240 – 249 mm (9.45 – 9.80″) |
11 mm (0.44”) |
Round |
250 mm (9.84") |
250 – 259 mm (9.84 – 10.2″) |
11 mm (0.44”) |
Round |
260 mm (10.24") |
260 – 269 mm (10.23 – 10.59″) |
11 mm (0.44”) |
Round |
270 mm (10.63") |
270 – 279 mm (10.63 – 10.98″) |
11 mm (0.44”) |
Round |
280 mm (11.02") |
280 – 289 mm (11.02 – 11.38″) |
11 mm (0.44”) |
Round |
290 mm (11.42") |
290 – 300 mm (11.42 – 11.77″) |
11 mm (0.44”) |
Round |
300 mm (11.81″) |
300 mm + (11.81″) |
11 mm (0.44”) |
Round heavy-duty self-adhesive furniture pads use 11 mm thick PA6 needle-punched fiber, more than double the Standard construction. The extra depth gives the fiber structure room to absorb heavy loads without compressing down to the adhesive layer. Under a grand piano or a 200 kg commercial dining table, Standard pads wear through in months. The 11 mm construction handles those same loads with significantly longer service life.
Yes. Pianos are the single most common application. Measure the diameter of each caster cup base (not the caster wheel) and select the slightly smaller pad size. The 11 mm PA6 distributes the piano’s concentrated weight across the full pad surface, preventing compression marks and finish damage. For square piano feet, use square heavy-duty pads instead.
Furniture heavy enough to need 11 mm protection almost always has legs Ø 30 mm or larger. Small accent furniture and lightweight chairs do not generate enough load to justify extra thickness. For legs under Ø 30 mm, Standard round pads with starting at Ø 12 mm provide the right balance.
It helps. The EHBT fiberglass mesh acrylic adhesive bonds on contact under sustained downward pressure. Heavy furniture accelerates the cure. More weight means a stronger, faster bond. This is the one installation advantage of heavy furniture. Once the round heavy-duty self-adhesive furniture pad is pressed in place and the furniture set back down, the bond sets more quickly than it would under a lightweight chair.
Yes, and this is one of the primary commercial applications. The 11 mm PA6 construction handles heavy table weight and repeated lateral movement across tile, polished concrete, and other hard commercial floors. For bulk commercial pricing, visit Business Solutions. If the table has square or rectangular legs, use square or rectangular heavy-duty pads.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet