Hospitality-grade floor protection · Sizing help before you order · Apply for a business account
Sizing help · Apply for a business account
Hospitality-grade floor protection · Sizing help before you order · Apply for a business account
Sizing help · Apply for a business account
A splayed oval leg that also stands on a hardwood floor needs two fixes at once: a level base and scratch protection. This does both. The angled head lands the leg flat, and the slot holds a PA6 pad that shields smooth, hard floors as the chair shifts. For tilted oval legs. Black and grey.
We make this size in production runs, so there is none on the shelf today. Tell us how many you would want and you go on the list for it. When enough people ask for a size, we run it, and the people who asked hear about it first.
We stock a limited range of tube sizes and wall thicknesses. Tell us the size you need and we will confirm availability and pricing by email.
Buying in volume? See business pricing & samples ↓
Standard angled oval tube plugs correct the leg tilt with a flat PE base. That solves the angle problem but leaves bare PE on the floor. On hardwood, laminate, vinyl, or any finished surface where scratches show, bare PE is adequate but not ideal. Angled oval tube plugs with pad slot add a second function: a built-in channel in the angled base that holds a PA6 pad insert. The angle corrects the tilt. The pad protects the floor. Two problems solved in one press-fit product.
PE body with flexible internal walls. 15° angle correction. Built-in pad slot with replaceable PA6 insert. Angled oval tube plugs with pad slot are angled oval plugs floor protection for splayed oval furniture legs on smooth, hard floors. One size: 25 × 35 mm with 1.5 to 2.5 mm wall thickness. Black and grey.
Four measurements: short axis (width), long axis (length), wall thickness, and leg angle. Angled oval tube plugs with pad slot require all four to match the one available specification: 25 mm short axis, 35 mm long axis, 1.5 to 2.5 mm wall, and approximately 15° leg tilt.
Use calipers across both axes of the oval opening. The short axis must be 25 mm and the long axis must be 35 mm. Then measure the wall thickness: it must be between 1.5 and 2.5 mm for the plug body to grip properly.
Place a digital angle finder on the leg and read the tilt from vertical. The reading should be close to 15° (roughly 12° to 18°) for the angle correction to work effectively. The PE base has slight flex that accommodates minor deviations from the exact 15° specification.
Same press-fit installation as all angled oval plugs, with the PA6 pad already in the slot. Three alignment requirements: the oval orientation, the angle direction, and the pad facing the floor. In practice, getting the angle right automatically puts the pad in the right position.
The specific intersection of two problems: tilted oval legs meeting smooth, hard floors where scratches show. The National Wood Flooring Association (NWFA) recommends protective pads on all furniture legs, and angled oval tube plugs with pad slot deliver both angle correction and NWFA-recommended pad protection in a single product.
The primary value. Without this product, protecting a tilted oval leg on a smooth, hard floor takes two separate steps: install an angled plug to correct the tilt, then apply a separate self-adhesive pad to the angled base. The pad sits on a curved, angled surface and can shift or peel over time. Angled oval tube plugs with pad slot integrate the pad channel directly into the angled head. The pad is recessed, secured, and aligned during manufacturing. One product. One installation. Tilted oval leg plugs with pad that eliminate the two-step process.
The PA6 pad provides the same low-friction, scratch-free floor contact found in all our furniture glides and self-adhesive pads. PA6 needle-punched polyamide 6 fiber deflects debris, resists chemical cleaners, and slides quietly across smooth, hard floors. Unlike bare PE or cheap adhesive pads that wear through quickly, the PA6 insert provides durable protection. Unlike leaving furniture legs unprotected, PA6 prevents the scratching that degrades floor finishes over time. Angled oval plugs PA6 pad that protect where it matters.
The pad slot holds the PA6 insert by friction. When the pad wears, swap it without disturbing the plug body in the tube. This is a meaningful advantage over rectangular tube plugs with pad, where the pad is permanently bonded and the entire plug must be replaced when the pad wears. Replaceable pads reduce waste and cost over the life of the furniture. The oval tube plugs pad slot angled design keeps maintenance simple.
Same sealed end and vibration dampening as every other oval plug in the range. The angled geometry and pad slot do not compromise the seal. Moisture, debris, and insects are kept out. The PA6 pad surface is quieter than bare PE on smooth, hard floors, so angled oval tube plugs with pad slot provide better noise reduction than a standard angled plug without a pad. Seal, level, protect, and quiet in one step.
The PA6 pad provides dedicated floor protection on smooth, hard floors. The pad is used on smooth, hard floors only. Not suitable for carpet or rough hard floors. Unlike bare PE, which is adequate but not ideal, PA6 is specifically engineered for furniture floor contact. The pad protects hardwood (solid and engineered), parquet, bamboo, laminate, luxury vinyl, ceramic and porcelain tile, natural stone including marble and granite (polished), sealed concrete, cork, and linoleum.
On rough hard surfaces like textured tile, stamped concrete, or slate, the PA6 pad may catch on surface irregularities. For those floors, furniture slides with ABS surfaces handle the texture better. On carpet, the PA6 pad provides adequate contact, though carpet does not require the scratch protection that smooth, hard floors do.
Same oval cross-section, different head styles, depths, and features.
25 × 35 mm, 15°. Angle + PA6 floor protection.
| Pad Slot Ø (Ø1) | Fits Tube (W) | Fits Tube (L) | Insert Depth (H) | Head Height (H1) | Height (H2) | Tube Wall Thickness (T) | Angle (α) |
|---|---|---|---|---|---|---|---|
| 20 mm (0.79″) | 25 mm (0.98″) | 35 mm (1.38″) | 12 mm (0.47″) | 5 mm (0.20″) | 14 mm (0.55″) | 1.5 to 2.5 mm (0.06″ to 0.10″) | 15° |
Tube wall thickness is a fit requirement, not a tolerance.
| Specification | Detail |
|---|---|
| Material | Polyamide, a harder plastic that holds its shape under load |
| Sizes | 1 size |
| Pad slot diameter (Ø1) | 20 mm (0.79″) |
| Width (W) | 25 mm (0.98″) |
| Length (L) | 35 mm (1.38″) |
| Height (H) | 12 mm (0.47″) |
| Head height (H1) | 5 mm (0.20″) |
| Height 2 (H2) | 14 mm (0.55″) |
| Tube wall thickness (T) | 1.5 to 2.5 mm (0.06″ to 0.10″) |
| Angle (α) | 15° |
| Mounting | Pushes into the tube, held by ribs |
| Colors | Black, Gray |
| Floor compatibility | Smooth hard floors |
| Minimum order | Sold in a minimum of 4, then any quantity you need |
This combines the angled base (for tilted legs) with a pad slot (for floor-specific protection). The angled head compensates for leg tilt. The pad slot accepts a felt or PA6 insert for scratch-free contact on smooth, hard floors. Two functions in one plug.
A felt or PA6 pad matching the slot dimensions. PA6 is recommended for hardwood, tile, and laminate because it won’t compress or trap grit. Felt works for light-duty applications.
Currently 25 × 35 mm with 1.5–2.5 mm wall thickness in black and grey. This covers the most common angled oval furniture leg where floor protection is also needed.
Yes. Without a pad, it functions as a standard angled oval plug with a recessed slot in the head. The slot doesn’t affect the press-fit hold. Add a pad later if needed.
Same press-fit method. Orient the angle and the oval profile correctly before pressing in. The pad slot adds no complexity to installation.
Angled Oval Tube Plugs with Pad Slot
Outfitting a hotel, restaurant, school, healthcare facility, or large furniture build? Superior Glide supports volume orders with bulk pricing tiers, free physical samples, and dedicated quote pricing for accounts placing larger orders.
Bulk pricing tiers, net terms for qualified buyers, and dedicated support for facility managers and procurement teams.
Hold the product, test the fit, check the finish. We ship samples free so you can evaluate before committing to a full order.
For orders above standard volume tiers, we’ll prepare a custom quote with consolidated shipping and your account’s tier pricing.
Reviews
There are no reviews yet