Hospitality-grade floor protection · Sizing help before you order · Apply for a business account
Sizing help · Apply for a business account
Hospitality-grade floor protection · Sizing help before you order · Apply for a business account
Sizing help · Apply for a business account
In a wet or humid spot, a zinc-plated rod rusts. This low-profile foot uses a stainless steel rod that won’t corrode, on the same 9 mm base that keeps the foot barely visible. Rated to 80 kg per foot.
We make this size in production runs, so there is none on the shelf today. Tell us how many you would want and you go on the list for it. When enough people ask for a size, we run it, and the people who asked hear about it first.
We stock a limited range of threads and lengths. Tell us what you need and we will confirm availability and pricing by email.
Buying in volume? See business pricing & samples ↓
Standard leveling feet use zinc-plated steel (Fe HDG) threaded rods. Zinc plating provides adequate corrosion resistance in dry indoor environments. But in commercial kitchens, food processing facilities, laboratories, bathrooms, and outdoor covered areas, moisture and chemicals attack the zinc plating over time, leading to rust, thread degradation, and eventually a weakened connection. Stainless steel rod low-profile adjustable leveling feet replace the zinc-plated rod with a stainless steel (INOX) rod that resists rust, corrosion, and degradation in these conditions. Stainless steel low profile leveling feet keep the thread clean where zinc plating will not.
Ø 30 mm PA base at 9 mm height (low-profile). Stainless steel (INOX) M8 threaded rod at 24 mm. Static load capacity: 80 kg per foot. Stainless steel rod low-profile adjustable leveling feet are corrosion resistant low-profile leveling feet for furniture in wet, humid, or chemical environments. Black. Sold in packs of 4, adjustable in steps of 2 at checkout.
The threaded rod is the only metal component in a leveling foot. It connects the PA base to the threaded insert inside the furniture leg. In dry environments, zinc plating protects the steel rod from corrosion adequately. In wet or chemical environments, the zinc plating degrades, exposing the underlying steel to moisture, cleaning chemicals, and food acids. The steel rusts, the threads degrade, and the connection weakens.
Adequate for dry indoor environments. The zinc layer provides sacrificial corrosion protection. In the presence of sustained moisture, cleaning chemicals, food acids, or salt air, the zinc layer erodes over time. Once the zinc is consumed, the underlying steel corrodes. Corroded threads become difficult to adjust and eventually lose load-bearing integrity.
Corrosion-resistant in wet, humid, and chemical environments. Stainless steel forms a passive chromium oxide layer on its surface that self-heals when scratched. The rod maintains its thread profile, adjustment function, and load capacity regardless of moisture exposure. INOX leveling feet for furniture that will encounter water, steam, cleaning chemicals, or food acids throughout its service life.
Stainless steel rod low-profile adjustable leveling feet combine minimal foot visibility with corrosion-resistant hardware. The 9 mm base keeps the foot nearly invisible. The INOX rod keeps the connection intact in wet environments.
The same Ø 30 mm base at 9 mm height as standard low-profile leveling feet. Minimal protrusion below the leg. Nearly invisible from standing or seated viewing angles. On design-focused furniture in upscale kitchens, hospitality bathrooms, and clean-room environments, the low-profile base preserves the furniture aesthetic while the stainless rod handles the environmental demands.
INOX rod that resists corrosion from water, steam, cleaning chemicals (bleach, quaternary ammonium, citric acid), food acids, humidity, and salt air. The rod maintains its thread integrity and adjustment function in environments that would corrode a zinc-plated rod within months. Stainless steel leveling feet low profile that handle the environment while staying invisible.
Stainless steel rod low-profile adjustable leveling feet are specified when the environment presents moisture, chemicals, or humidity that would degrade a zinc-plated rod over the furniture’s service life.
Same screw-in process as any leveling foot. The stainless steel rod threads into the insert the same way a zinc-plated rod does. No special installation procedure is needed for the stainless version.
Stainless steel contains chromium (typically 10.5% or more by mass). The chromium reacts with oxygen to form a thin, invisible chromium oxide layer on the steel surface. This passive layer is the corrosion barrier. If the surface is scratched, the chromium oxide layer reforms immediately on exposure to air. This self-healing property is why stainless steel maintains its corrosion resistance throughout its service life, even in abrasive or chemically active environments.
Zinc plating on standard steel rods works differently. The zinc layer is sacrificial: it corrodes preferentially to protect the underlying steel. Once the zinc is consumed, the steel corrodes. In wet environments, the zinc consumption accelerates, and the rod may begin rusting within months to a few years. Stainless steel rod low-profile adjustable leveling feet bypass this mechanism entirely. There is no sacrificial layer to consume. The base metal itself resists corrosion.
Stainless steel rod low-profile adjustable leveling feet resist the cleaning chemicals commonly used in commercial kitchens, laboratories, and healthcare facilities. Both the PA base and the INOX rod tolerate repeated exposure to these agents.
These aggressive chemicals can attack even stainless steel with prolonged direct contact. Standard cleaning protocols in food service and healthcare do not use these at concentrations that affect stainless steel.
For furniture manufacturers, stainless steel rod low-profile adjustable leveling feet are a single-SKU specification: Ø 30 mm, M8 × 24 mm, low-profile base, INOX rod. Specify alongside M8 threaded inserts in the bill of materials. The stainless rod adds a upcharge over zinc-plated, but the elimination of corrosion-related replacement across the furniture’s service life in wet or chemical environments typically offsets the higher upfront cost within the first year of operation.
For facility managers retrofitting existing furniture, stainless steel rod low-profile adjustable leveling feet replace corroded zinc-plated feet on the same M8 inserts without modification. On a kitchen with 30 tables showing corroded feet, the retrofit is a one-time investment that eliminates the recurring corrosion-replacement cycle. For production quantities, visit Business Solutions.
All leveling feet share the same M-thread interface regardless of rod material. You can use stainless steel rod low-profile adjustable leveling feet on legs exposed to moisture and zinc-plated low-profile feet on legs in dry areas of the same furniture. Both use M8, both have the same Ø 30 mm base at 9 mm height. However, in most wet environments, all legs are equally exposed, so using stainless on all legs is typically the practical choice.
corrosion-resistant leveling on design-focused furniture in wet environments. The National Wood Flooring Association (NWFA) recommends protective contact surfaces on all furniture legs, and the PA base provides the same non-scratching floor contact as standard low-profile feet.
The primary advantage. The stainless steel rod maintains its thread profile and adjustment function in wet environments indefinitely. The threaded connection between the rod and the insert stays clean, smooth, and fully functional even after exposure to water, steam, cleaning chemicals, and food acids. Stainless rod leveling feet M8 that keep adjusting smoothly in conditions that seize zinc-plated rods.
Upscale restaurant kitchens, spa treatment rooms, and hospitality bathrooms demand both design quality and environmental durability. The 9 mm low-profile base stays invisible. The stainless rod stays corrosion-free. Unlike using standard zinc-plated feet in wet environments, stainless steel rod low-profile adjustable leveling feet do not compromise durability for appearance or appearance for durability.
Stainless steel has comparable or higher tensile strength than zinc-plated carbon steel. The M8 thread at 80 kg per foot performs identically to the zinc-plated version. The material upgrade affects only corrosion resistance, not structural performance. On a four-legged table, 320 kg total capacity handles standard commercial furniture weight in any environment.
A zinc-plated rod in a wet environment eventually corrodes and needs replacement. The corroded rod may seize in the insert, requiring insert replacement as well. Stainless steel eliminates this replacement cycle. The rod stays functional for the service life of the furniture. In commercial kitchens with dozens of tables, eliminating the corrosion-replacement cycle across the fleet represents meaningful maintenance savings.
| Diameter (Ø) | Length (L) | Height (H) | Thread (M) | Static load (SL) |
|---|---|---|---|---|
| 30 mm (1.18″) | 24 mm (0.94″) | 9 mm (0.35″) | M8 | 80 kg |
Thread size must match the insert in your furniture leg.
| Specification | Detail |
|---|---|
| Material | Polyamide body with a stainless steel thread |
| Sizes | 1 size |
| Diameter (Ø) | 30 mm (1.18″) |
| Length (L) | 24 mm (0.94″) |
| Height (H) | 9 mm (0.35″) |
| Thread (M) | M8 |
| Static load (SL) | 80 kg |
| Mounting | Screws into a threaded insert |
| Colors | Black |
| Floor compatibility | Any floor, levels on uneven ground |
| Minimum order | Sold in a minimum of 4, then any quantity you need |
Zinc plating provides adequate corrosion resistance for standard dry indoor environments. In wet, humid, or chemical-exposure environments (commercial kitchens, food processing, laboratories, bathrooms, outdoor covered areas), zinc plating can corrode over time. Stainless steel resists corrosion in these conditions, maintaining the threaded connection’s integrity and load capacity for the service life of the furniture.
No. The base is PA (polyamide), the same material as all other leveling feet. PA is inherently corrosion-proof, moisture-proof, and chemical-resistant. Only the threaded rod is upgraded to stainless steel because the rod is the component susceptible to corrosion in wet environments.
You can, but there is rarely a reason to. If any leg is exposed to moisture or chemicals, all legs likely are. Use stainless on all legs for consistent corrosion resistance. The M8 thread is compatible with the same round, square, and rectangular threaded inserts.
No. Stainless steel has comparable or higher tensile strength than zinc-plated steel. The M8 thread at 80 kg per foot is the same rating as the zinc-plated version. The material change affects corrosion resistance, not structural performance.
Because a zinc plated rod is an indoor part. A stainless steel leveling foot keeps its thread clean in damp rooms, kitchens and washdown areas, in the same 9 mm low profile base.
Because a zinc plated rod is an indoor part. A stainless steel leveling foot keeps its thread clean in damp rooms, kitchens and washdown areas, in the same 9 mm low profile base.
Stainless Steel Rod Low-Profile Adjustable Leveling Feet
Outfitting a hotel, restaurant, school, healthcare facility, or large furniture build? Superior Glide supports volume orders with bulk pricing tiers, free physical samples, and dedicated quote pricing for accounts placing larger orders.
Bulk pricing tiers, net terms for qualified buyers, and dedicated support for facility managers and procurement teams.
Hold the product, test the fit, check the finish. We ship samples free so you can evaluate before committing to a full order.
For orders above standard volume tiers, we’ll prepare a custom quote with consolidated shipping and your account’s tier pricing.
Reviews
There are no reviews yet