Hospitality-grade floor protection · Sizing help before you order · Apply for a business account
Sizing help · Apply for a business account

Rectangular Foam Self-Adhesive Furniture Pads

A bowed sled runner or a warped rectangular base never sits flush, so a rigid pad only touches in spots. The EVA foam layer here flexes to follow the leg, keeping the PA6 fiber surface in full contact along its whole length, and it dampens vibration and noise as it goes. EHBF acrylic foam adhesive bonds to any leg material. For smooth, hard floors.

$0.47$5.49

Not sure what size? See the size chart

Buying in volume? See business pricing & samples ↓

Overview

Rectangular Foam Furniture Pads, Self-Adhesive

Long rectangular bases warp, bow, and develop high spots that flat, rigid pads cannot follow. You press a Standard pad onto a bowed runner, and the adhesive contacts both ends but lifts in the middle. Every time someone sits down, the gap opens and closes, grinding the edge of the lifted pad into the finish. Rectangular foam self-adhesive furniture pads add an EVA closed-cell foam layer that conforms to the full length of the base, compressing at the high spots and filling gaps at the low spots. PA6 needle-punched fiber on top for silent, low-friction floor protection across the entire runner. Rectangular foam furniture pads compress to follow the bow, so the whole strip stays in contact.

combinations across 6 width groups (20 to 60 mm) with lengths up to 300 mm. Same PA6 surface as all our pads and glides. Foam furniture pads for hardwood floors, tile, laminate, vinyl, and stone. Rectangular foam self-adhesive furniture pads are the vibration dampening rectangular furniture pads that bowed sled runners, warped bases, and vibrating equipment actually need. EHBF acrylic foam adhesive bonds to wood, metal, and plastic bases with no tools and no hardware.

How to Measure for Rectangular Foam Self-Adhesive Furniture Pads

Same two-measurement process: width (short side) and length (long side) in millimeters. Find your width group, select the length, go slightly smaller if between sizes. The foam adds thickness but does not change how you measure. With 103 rectangular foam self-adhesive furniture pad sizes, there is a near-exact match for every rectangular leg and sled base.

Step 1. Access the base

Flip the furniture or tilt it on its side. For sled bases, examine the full length of each runner. Look for bowing, warping, or high spots along the contact surface where the rectangular foam self-adhesive furniture pad will bond.

Step 2. Measure width and length

Width is the shorter dimension. Length is the longer one. For sled bases, measure the flat contact length of each runner, not the curved section that lifts off the floor.

Step 3. Match to width group, then length

Find your width group (20 to 60 mm), then select the length. If your measurement falls between two sizes, go slightly smaller. A rectangular foam self-adhesive furniture pad inside the footprint stays bonded even on bowed surfaces.

Bowed sled runners: measure the contact length even if the runner bows in the middle. The foam layer conforms to the bow. You are measuring for coverage, not flatness. The foam does not need the runner to be straight. That is the entire point of furniture pads for warped sled runners.

How to Install

Same peel-and-press installation as all our pads. No tools required except scissors or a utility knife for trimming to length. The foam layer makes rectangular foam self-adhesive furniture pads more forgiving during installation. On Standard pads, a bowed runner means the adhesive only contacts the ends. On foam pads, the foam fills the bow and gives the adhesive full contact along the entire length from the start.

What you need
  • 70% isopropyl alcohol and a lint-free cloth
  • Access to leg bases or runners
  • Scissors or utility knife for trimming to length if needed
  • No drill, no screws, no hardware
Installation steps
  1. Wipe the runner or leg base with isopropyl alcohol. Clean surface gives a strong bond, even on bowed runners.
  2. Peel the red backing from the rectangular foam self-adhesive furniture pad to expose the EHBF (red) adhesive layer.
  3. For sled runners, start at one end and Press along the full length for 30 seconds. The foam conforms to surface irregularities automatically. Full contact, no air pockets.
  4. Set the furniture back down. The weight compresses the foam into full contact with every contour. Give the adhesive 24 to 48 hours for full bond strength.
Replacing old pads on bowed runners: peel the old one off. Clean the full length with isopropyl alcohol. Apply a fresh rectangular foam self-adhesive furniture pad from one end to the other. The foam on the new pad will conform to whatever the runner looks like now, even if the bow has changed since the old pad was installed.

Floor and Furniture Compatibility

✓ Use these pads on
  • Sled-base furniture with bowed or warped runners
  • Cantilever chairs with imperfect runner contact
  • Rectangular legs with uneven base surfaces
  • Furniture that wobbles or rocks due to runner irregularities
  • Equipment and appliances that vibrate
  • Sled-base chairs on upper floors where noise travels through the structure
  • Any rectangular furniture base on hardwood, tile, laminate, vinyl, or stone
  • Wood, metal, and plastic legs
✗ Not the right product for
Smooth, hard floor compatibility

Same chemically inert PA6 surface as all our pads. It will not react with floor sealers, wax, or cleaning products. The National Wood Flooring Association (NWFA) recommends protective pads on all furniture legs as a first line of defense for hardwood. Rectangular foam self-adhesive furniture pads meet that standard across every smooth, hard floor type listed below.

Hardwood: solid and engineered, all species
Parquet, bamboo, reclaimed wood
Laminate: all types and AC ratings
Luxury vinyl: LVP, LVT, sheet vinyl
Ceramic and porcelain tile
Natural stone: marble and granite (polished)
Concrete: sealed, polished, epoxy-coated
Cork flooring
Linoleum and Marmoleum

Standard, Heavy-Duty, or Foam? Choosing the Right Rectangular Pad

Three versions of rectangular self-adhesive furniture pads. Same PA6 surface on all three. Same floor protection. The difference is what sits between the PA6 and the leg.

Standard pads

PA6 + EHBT adhesive, plus 510 mm strips. For flat, level runners at normal weight.

View Standard rectangular pads →

Heavy-Duty Pads

11 mm thick PA6 + EHBT adhesive, plus the 460 mm strip. For heavy furniture that wears through Standard pads.

For heavy furniture →

Foam Pads (This Product)

PA6 + EVA foam + EHBF adhesive. These pads in For warped runners, bowed bases, and vibration dampening.

You are viewing this product.

All three versions protect smooth, hard floors equally well. Standard for everyday. Heavy-duty for extreme weight. Foam for imperfect surfaces and vibration.

Which Foam Pad Shape Matches Your Furniture?

Match the pad shape to the leg shape. All three foam pad shapes use the same EVA foam construction. Only the shape differs.

Round Foam

For round legs with uneven bases. from Ø 18 mm to Ø 300 mm.

Square Foam

For square legs with uneven bases. from 18 × 18 mm to 300 × 300 mm.

Rectangular Foam ← You are here.

These pads for rectangular legs and warped sled runners. across 6 width groups.

Your floor was not scratched by the chair

It was scratched by the pad you put there to protect it. Here is how that happens, and what we do differently.

A felt pad, six weeks in

Flat felt is an open mat

It picks up sand and grit from the floor and holds it there. Every time the chair moves, that grit is dragged across the finish. The pad is still doing its job, and it is the thing causing the damage.

Superior Glide

A PA6 fiber face

Vertical fiber, not a flat mat. It does not trap debris the way flat felt does, and it holds its thickness under a loaded sofa or bookcase.

What happensCheap felt padSuperior Glide
StructureFlat, matted fiber with an open surfacePA6 needle-punched fiber
GritAbsorbs it and holds it against the floor finishDoes not trap debris the way flat felt does
Under weightCompresses, and stays compressedBuilt to take repeated movement without compressing flat
Staying onHardware-store pressure-sensitive backing creeps under sideways load and lets go at the leg faceEHBT fiberglass mesh. Clean the leg, peel, press for 30 seconds, allow 48 hours to cure
FitAn assortment pack, and you hope one size landsSized to your leg. Measure the base, order the size that sits flush or just inside it
Floor matchSold as suitable for every floorMatched to your floor. PA6 fiber for smooth hard floors, ABS for carpet and rough floors

These pads are for smooth hard floors and furniture that mostly stays put. For chairs that get dragged daily, furniture glides are the better fit.

Size Chart

Size (W × L)Fits legs measuring
20 × 30 mm (0.79″ × 1.18″)20 to 29 × 30 to 39 mm
20 × 40 mm (0.79″ × 1.57″)20 to 29 × 40 to 49 mm
20 × 50 mm (0.79″ × 1.97″)20 to 29 × 50 to 59 mm
20 × 60 mm (0.79″ × 2.36″)20 to 29 × 60 to 69 mm
20 × 70 mm (0.79″ × 2.76″)20 to 29 × 70 to 79 mm
20 × 80 mm (0.79″ × 3.15″)20 to 29 × 80 to 89 mm
20 × 90 mm (0.79″ × 3.54″)20 to 29 × 90 to 99 mm
20 × 100 mm (0.79″ × 3.94″)20 to 29 × 100 to 109 mm
20 × 110 mm (0.79″ × 4.33″)20 to 29 × 110 to 119 mm
20 × 120 mm (0.79″ × 4.72″)20 to 29 × 120 to 129 mm
20 × 130 mm (0.79″ × 5.12″)20 to 29 × 130 to 139 mm
20 × 140 mm (0.79″ × 5.51″)20 to 29 × 140 to 149 mm
20 × 150 mm (0.79″ × 5.91″)20 to 29 × 150 to 159 mm
20 × 160 mm (0.79″ × 6.30″)20 to 29 × 160 to 169 mm
20 × 170 mm (0.79″ × 6.69″)20 to 29 × 170 to 179 mm
20 × 180 mm (0.79″ × 7.09″)20 to 29 × 180 to 189 mm
20 × 190 mm (0.79″ × 7.48″)20 to 29 × 190 to 199 mm
20 × 200 mm (0.79″ × 7.87″)20 to 29 × 200+ mm
30 × 40 mm (1.18″ × 1.57″)30 to 39 × 40 to 49 mm
30 × 50 mm (1.18″ × 1.97″)30 to 39 × 50 to 59 mm
30 × 60 mm (1.18″ × 2.36″)30 to 39 × 60 to 69 mm
30 × 70 mm (1.18″ × 2.76″)30 to 39 × 70 to 79 mm
30 × 80 mm (1.18″ × 3.15″)30 to 39 × 80 to 89 mm
30 × 90 mm (1.18″ × 3.54″)30 to 39 × 90 to 99 mm
30 × 100 mm (1.18″ × 3.94″)30 to 39 × 100 to 109 mm
30 × 110 mm (1.18″ × 4.33″)30 to 39 × 110 to 119 mm
30 × 120 mm (1.18″ × 4.72″)30 to 39 × 120 to 129 mm
30 × 130 mm (1.18″ × 5.12″)30 to 39 × 130 to 139 mm
30 × 140 mm (1.18″ × 5.51″)30 to 39 × 140 to 149 mm
30 × 150 mm (1.18″ × 5.91″)30 to 39 × 150 to 159 mm
30 × 160 mm (1.18″ × 6.30″)30 to 39 × 160 to 169 mm
30 × 170 mm (1.18″ × 6.69″)30 to 39 × 170 to 179 mm
30 × 180 mm (1.18″ × 7.09″)30 to 39 × 180 to 189 mm
30 × 190 mm (1.18″ × 7.48″)30 to 39 × 190 to 199 mm
30 × 200 mm (1.18″ × 7.87″)30 to 39 × 200+ mm
40 × 50 mm (1.57″ × 1.97″)40 to 49 × 50 to 59 mm
40 × 60 mm (1.57″ × 2.36″)40 to 49 × 60 to 69 mm
40 × 70 mm (1.57″ × 2.76″)40 to 49 × 70 to 79 mm
40 × 80 mm (1.57″ × 3.15″)40 to 49 × 80 to 89 mm
40 × 90 mm (1.57″ × 3.54″)40 to 49 × 90 to 99 mm
40 × 100 mm (1.57″ × 3.94″)40 to 49 × 100 to 109 mm
40 × 110 mm (1.57″ × 4.33″)40 to 49 × 110 to 119 mm
40 × 120 mm (1.57″ × 4.72″)40 to 49 × 120 to 129 mm
40 × 130 mm (1.57″ × 5.12″)40 to 49 × 130 to 139 mm
40 × 140 mm (1.57″ × 5.51″)40 to 49 × 140 to 149 mm
40 × 150 mm (1.57″ × 5.91″)40 to 49 × 150 to 159 mm
40 × 160 mm (1.57″ × 6.30″)40 to 49 × 160 to 169 mm
40 × 170 mm (1.57″ × 6.69″)40 to 49 × 170 to 179 mm
40 × 180 mm (1.57″ × 7.09″)40 to 49 × 180 to 189 mm
40 × 190 mm (1.57″ × 7.48″)40 to 49 × 190 to 199 mm
40 × 200 mm (1.57″ × 7.87″)40 to 49 × 200 to 209 mm
40 × 210 mm (1.57″ × 8.27″)40 to 49 × 210 to 219 mm
40 × 220 mm (1.57″ × 8.66″)40 to 49 × 220 to 229 mm
40 × 230 mm (1.57″ × 9.06″)40 to 49 × 230 to 239 mm
40 × 240 mm (1.57″ × 9.45″)40 to 49 × 240 to 249 mm
40 × 250 mm (1.57″ × 9.84″)40 to 49 × 250+ mm
50 × 70 mm (1.97″ × 2.76″)50 to 59 × 70 to 79 mm
50 × 80 mm (1.97″ × 3.15″)50 to 59 × 80 to 89 mm
50 × 90 mm (1.97″ × 3.54″)50 to 59 × 90 to 99 mm
50 × 100 mm (1.97″ × 3.94″)50 to 59 × 100 to 109 mm
50 × 110 mm (1.97″ × 4.33″)50 to 59 × 110 to 119 mm
50 × 120 mm (1.97″ × 4.72″)50 to 59 × 120 to 129 mm
50 × 130 mm (1.97″ × 5.12″)50 to 59 × 130 to 139 mm
50 × 140 mm (1.97″ × 5.51″)50 to 59 × 140 to 149 mm
50 × 150 mm (1.97″ × 5.91″)50 to 59 × 150 to 159 mm
50 × 160 mm (1.97″ × 6.30″)50 to 59 × 160 to 169 mm
50 × 170 mm (1.97″ × 6.69″)50 to 59 × 170 to 179 mm
50 × 180 mm (1.97″ × 7.09″)50 to 59 × 180 to 189 mm
50 × 190 mm (1.97″ × 7.48″)50 to 59 × 190 to 199 mm
50 × 200 mm (1.97″ × 7.87″)50 to 59 × 200 to 209 mm
50 × 210 mm (1.97″ × 8.27″)50 to 59 × 210 to 219 mm
50 × 220 mm (1.97″ × 8.66″)50 to 59 × 220 to 229 mm
50 × 230 mm (1.97″ × 9.06″)50 to 59 × 230 to 239 mm
50 × 240 mm (1.97″ × 9.45″)50 to 59 × 240 to 249 mm
50 × 250 mm (1.97″ × 9.84″)50 to 59 × 250 to 259 mm
50 × 260 mm (1.97″ × 10.24″)50 to 59 × 260 to 269 mm
50 × 270 mm (1.97″ × 10.63″)50 to 59 × 270 to 279 mm
50 × 280 mm (1.97″ × 11.02″)50 to 59 × 280 to 289 mm
50 × 290 mm (1.97″ × 11.42″)50 to 59 × 290 to 299 mm
50 × 300 mm (1.97″ × 11.81″)50 to 59 × 300+ mm
60 × 80 mm (2.36″ × 3.15″)60+ × 80 to 89 mm
60 × 90 mm (2.36″ × 3.54″)60+ × 90 to 99 mm
60 × 100 mm (2.36″ × 3.94″)60+ × 100 to 109 mm
60 × 110 mm (2.36″ × 4.33″)60+ × 110 to 119 mm
60 × 120 mm (2.36″ × 4.72″)60+ × 120 to 129 mm
60 × 130 mm (2.36″ × 5.12″)60+ × 130 to 139 mm
60 × 140 mm (2.36″ × 5.51″)60+ × 140 to 149 mm
60 × 150 mm (2.36″ × 5.91″)60+ × 150 to 159 mm
60 × 160 mm (2.36″ × 6.30″)60+ × 160 to 169 mm
60 × 170 mm (2.36″ × 6.69″)60+ × 170 to 179 mm
60 × 180 mm (2.36″ × 7.09″)60+ × 180 to 189 mm
60 × 190 mm (2.36″ × 7.48″)60+ × 190 to 199 mm
60 × 200 mm (2.36″ × 7.87″)60+ × 200 to 209 mm
60 × 210 mm (2.36″ × 8.27″)60+ × 210 to 219 mm
60 × 220 mm (2.36″ × 8.66″)60+ × 220 to 229 mm
60 × 230 mm (2.36″ × 9.06″)60+ × 230 to 239 mm
60 × 240 mm (2.36″ × 9.45″)60+ × 240 to 249 mm
60 × 250 mm (2.36″ × 9.84″)60+ × 250 to 259 mm
60 × 260 mm (2.36″ × 10.24″)60+ × 260 to 269 mm
60 × 270 mm (2.36″ × 10.63″)60+ × 270 to 279 mm
60 × 280 mm (2.36″ × 11.02″)60+ × 280 to 289 mm
60 × 290 mm (2.36″ × 11.42″)60+ × 290 to 299 mm
60 × 300 mm (2.36″ × 11.81″)60+ × 300+ mm

Choose the size flush with the leg base or slightly smaller, never larger.

Specifications

SpecificationDetail
MaterialPA6 polyamide fiber, EHBT fiberglass mesh mounting, EHBF acrylic foam adhesive
Sizes20, 30, 40, 50, 60 mm
Height (H)7 mm (0.28″)
MountingEHBF acrylic foam adhesive
ColorsBlack
Floor compatibilitySmooth hard floors
FittingClean the leg with 70% isopropyl alcohol, peel, press firmly for 30 seconds, allow 48 hours to cure.
Minimum orderSold in a minimum of 4, then any quantity you need

Frequently Asked Questions

Why do sled-base runners need foam pads more than other shapes?

Long runners bow, warp, and develop high spots along their length from manufacturing stress, repeated use, and temperature changes. A rigid pad on a bowed runner only contacts the ends, lifting in the middle. Every sit-down flexes the lifted section and accelerates peel. Rectangular foam self-adhesive furniture pads conform to the full contour of the runner, maintaining adhesive contact along the entire length regardless of how much the runner has bowed.

How many sizes are available across the 6 width groups?

103 combinations. Widths from 20 mm to 60 mm, with lengths scaling independently in each group up to 300 mm. Measure the short side of the runner first to identify the width group, then find the length that matches. If your measurement falls between two sizes, go slightly smaller so the rectangular foam self-adhesive furniture pad sits inside the footprint.

Can I use these on a cantilever chair with slightly bowed runners?

Yes. Cantilever chairs are one of the primary applications. The springy frame design puts stress on the runners that causes gradual bowing over time. The EVA foam conforms to that bow and maintains full floor contact along the entire runner. This protects the floor and eliminates the rocking that bowed cantilever runners cause.

What is the difference between foam pads and heavy-duty pads for rectangular furniture?

Different problems, different solutions. Rectangular heavy-duty pads use 11 mm thick PA6 for extreme weight (heavy commercial tables, institutional furniture). Rectangular foam self-adhesive furniture pads use EVA foam for conforming to warped or bowed runners and dampening vibration. If the furniture is both heavy and warped, heavy-duty pads are the better choice because the 11 mm depth handles both problems.

Will foam pads reduce the noise from sled-base chairs on upper floors?

Yes. The EVA foam layer absorbs the impact vibration that occurs every time someone sits down or stands up in a sled-base chair. Without the foam, that impact transfers through the runner, through the floor, and into the structure below. Rectangular foam self-adhesive furniture pads interrupt that transfer path. You will notice reduced impact noise in the rooms below, especially on smooth, hard floors over wood-frame construction.

Reviews

Reviews

There are no reviews yet

Add a review
Rectangular Foam Self-Adhesive Furniture Pads Rectangular Foam Self-Adhesive Furniture Pads
Rating*
0/5
* Rating is required
Your review
* Review is required
Name
* Name is required
Add photos or video to your review
* Please tick the checkbox to proceed

Recently Viewed

For Business & Volume Orders

Outfitting a hotel, restaurant, school, healthcare facility, or large furniture build? Superior Glide supports volume orders with bulk pricing tiers, free physical samples, and dedicated quote pricing for accounts placing larger orders.

Business Accounts

Bulk pricing tiers, net terms for qualified buyers, and dedicated support for facility managers and procurement teams.

Free Physical Samples

Hold the product, test the fit, check the finish. We ship samples free so you can evaluate before committing to a full order.

Custom Quote

For orders above standard volume tiers, we’ll prepare a custom quote with consolidated shipping and your account’s tier pricing.

Overview Size Chart Specs FAQs Reviews