Hospitality-grade floor protection · Sizing help before you order · Apply for a business account
Sizing help · Apply for a business account
Hospitality-grade floor protection · Sizing help before you order · Apply for a business account
Sizing help · Apply for a business account
Bare rectangular wood legs scratch a hard floor and leave drag marks. These cover the leg end to end in PA6 fiber that glides silently and scuff-free, with a zinc-plated rivet that taps into solid wood. No pre-drilling, no adhesive. Fits rectangular legs up to 40 × 25 mm.
Buying in volume? See business pricing & samples ↓
Rectangular furniture legs need glides shaped to match. Not round glides that leave the long edges exposed. Not square glides that overhang on two sides. Rectangular nail-on furniture glides cover the full footprint end to end, edge to edge. Rectangular chair glides suit dining and stacking chairs whose legs are longer than they are wide.
PA6 needle-punched fiber glides silently across hardwood, tile, laminate, vinyl, and stone. Felt compresses flat, traps debris, and peels off within a month. PA6 fiber holds its structure. These are the mid-century chair leg protectors engineered for rectangular wooden legs from the ground up.
A zinc-plated tubular rivet drives into solid wood legs with a rubber mallet. An anti-rotation notch molded into the rivet locks the glide in alignment with the rectangular leg profile: no pre-drilling, no adhesive, no curing time.
Rectangular nail-on furniture glides come in one precision size: 33 × 19 mm, fitting rectangular legs up to 40 × 25 mm. Nail-on floor protectors for mid-century and Scandinavian chair legs on every smooth, hard floor. For solid wood legs only.
Rectangular legs have two different dimensions: length and width. You need both numbers.
Whether the leg is solid hardwood, softwood, or MDF, the measurement process is the same. Getting the right fit matters because nail-on glides for rectangular legs only protect hardwood and other smooth, hard floors when they cover the full leg base.
Lay the piece on its side or turn it upside down. You need full access to the flat bottom face of each leg where the rectangular nail-on furniture glide will sit.
Place a ruler across the longer edge of the leg base. Record in millimeters. Then measure the shorter edge. Rectangular nail-on furniture glides are 33 × 19 mm and fit legs up to 40 × 25 mm. If both sides are equal (or nearly equal), the leg is square. Use square nail-on furniture glides instead.
Rectangular legs on tapered or splayed furniture may vary slightly from leg to leg. Measure each one at the base. As long as all four fall within the 33–40 mm × 19–25 mm range, the same glide fits every leg.
Installation takes under a minute per leg. No pre-drilling required on any hardwood, MDF, or softwood species.
The zinc-plated tubular rivet separates wood fibers without removing them. This creates the strongest connection method for rectangular-legged furniture that needs to glide silently on smooth, hard floors.
PA6 is chemically inert and leaves no marks, scuffs, or residue on any sealed floor finish. The National Wood Flooring Association (NWFA) recommends furniture protectors on every leg as a primary hardwood maintenance step.
Rectangular nail-on furniture glides deliver silent, low-friction movement without scratching. These hardwood floor protectors are built for long-term performance on every surface listed below.
Rectangular nail-on furniture glides are built on the same ABS platform and rivet construction used across the nail-on line. The only difference is the contact surface, which determines whether furniture moves freely or holds position.
Low-friction PA6 fiber for rectangular-legged furniture that repositions regularly. Mid-century dining chairs, Scandinavian side chairs, writing desks. These are the mid-century chair glides you are viewing now.
Controlled end-to-end grip for rectangular-legged furniture that must stay put. Mid-century accent tables, display furniture, and any rectangular-legged piece where sliding is a problem or a safety concern.
Both variants use the same ABS platform and ZnFe tubular rivet with an anti-rotation notch. The PA6 and NR+CR surfaces cannot be swapped in place. Removal and replacement with the correct variant is required.
The glide shape must match the leg cross-section. A mismatch leaves part of the leg base unprotected, and unprotected contact points are where floor damage happens. All three shapes use the same PA6 surface, ABS platform, and ZnFe rivet.
For circular, turned, tapered, and cylindrical legs. from Ø 23 mm to Ø 75 mm.
For equal-sided square legs. Full corner-to-corner PA6 coverage. from 23 × 23 mm to 75 × 75 mm.
For rectangular legs with unequal sides. Full end-to-end PA6 coverage. 33 × 19 mm.
It was scratched by the pad you put there to protect it. Here is how that happens, and what we do differently.
It picks up sand and grit from the floor and holds it there. Every time the chair moves, that grit is dragged across the finish. The pad is still doing its job, and it is the thing causing the damage.
Vertical fiber, not a flat mat. It does not trap debris the way flat felt does, and it is built to take repeated movement without compressing flat.
| What happens | Cheap felt pad | Superior Glide |
|---|---|---|
| Structure | Flat, matted fiber with an open surface | PA6 needle-punched fiber |
| Grit | Absorbs it and holds it against the floor finish | Does not trap debris the way flat felt does |
| Under weight | Compresses, and stays compressed | Built to take repeated movement without compressing flat |
| Staying on | Hardware-store pressure-sensitive backing creeps under sideways load and lets go at the leg face | Nail-on with a zinc-plated tubular rivet. It taps into solid wood and grips a wider area than a nail or a screw |
| Fit | An assortment pack, and you hope one size lands | Sized to your leg. Measure the base, order the size that sits flush or just inside it |
| Floor match | Sold as suitable for every floor | Matched to your floor. PA6 fiber for smooth hard floors, ABS for carpet and rough floors |
These glides are for smooth hard floors: hardwood, engineered wood, laminate, luxury vinyl, linoleum, cork and polished tile. For carpet, textured tile, or any floor with deep grout lines, you want furniture slides instead.
| Size | Fits legs measuring |
|---|---|
| 33 × 19 mm (1.30″ × 0.75″) | 33 × 19 to 40 × 25 mm (1.30″ × 0.75″ to 1.57″ × 0.98″) |
Measure the flat base of the leg and choose the size in that row. The glide sits flush with the leg base or just inside it, never wider. For legs over 95 mm (3.74″), use a self-adhesive furniture pad, which is sized to the leg rather than fitted to it.
One sheet covers round, square, and rectangular legs, for both nail-on and self-adhesive versions.
Printable size guide (PDF)Print at 100% actual size, then hold your leg against each shape.
| Specification | Detail |
|---|---|
| Material | Zinc-plated steel rivet, ABS, PA6 polyamide fiber |
| Sizes | 33 × 19 mm (1.30″ × 0.75″) |
| Rivet Ø (Ø1) | 9.2 mm (0.36″) |
| Height (H) | 12 mm (0.47″) |
| Rivet length (H1) | 5.5 mm (0.22″) |
| Mounting | Zinc rivet, tapped in with a rubber mallet |
| Colors | Black |
| Floor compatibility | Smooth hard floors only |
| Minimum order | Sold in a minimum of 4, then any quantity you need |
A round glide inscribed inside a rectangular leg leaves both long edges and both narrow ends exposed. Those unprotected sections bear directly on the floor. Because rectangular legs carry weight along the long axis, the exposed edges take the heaviest load and cause the most damage. Rectangular nail-on furniture glides match the full footprint end to end, edge to edge, so every millimeter is protected by PA6 fiber.
Rectangular nail-on furniture glides come in one precision size: 33 × 19 mm. They fit rectangular legs from 33 × 19 mm up to 40 × 25 mm, which covers the vast majority of mid-century, Scandinavian, transitional, and contemporary rectangular wooden legs. If your leg exceeds 40 × 25 mm, rectangular self-adhesive furniture pads offer in 6 width groups for an exact dimensional match.
Check for flat sides. If all four faces of the leg base are flat and meet at defined edges, the leg is rectangular. If the base has curved edges with no flat faces, the leg is oval or ellipse. Rectangular nail-on furniture glides are designed for flat-sided legs only. For oval legs, use round self-adhesive furniture pads sized to the widest dimension, or rectangular self-adhesive furniture pads for a closer match.
Both use the same ABS platform, the same ZnFe rivet, and the same 33 × 19 mm size. The difference is the floor-contact surface. Rectangular nail-on furniture glides (Smooth Glide) use low-friction PA6 fiber for furniture that needs to move freely, like mid-century dining chairs. Rectangular anti-slip nail-on furniture glides use NR+CR rubber for furniture that must stay put, like accent tables. Both fit the same rivet hole.
Yes. The tubular rivet parts wood fibers on entry rather than boring them out. When a glide is removed, the fibers spring back. A new glide or slide seats firmly in the same hole with full holding force. You can swap between rectangular nail-on furniture glides (for hard floors), rectangular anti-slip nail-on furniture glides (for grip), and rectangular nail-on furniture slides (for carpet) without widening the hole or needing filler.
When the leg is rectangular. A round or square glide leaves the long edges bare, while one rectangular glide covers the full footprint of the leg and wears evenly.
Rectangular Nail-On Furniture Glides
Outfitting a hotel, restaurant, school, healthcare facility, or large furniture build? Superior Glide supports volume orders with bulk pricing tiers, free physical samples, and dedicated quote pricing for accounts placing larger orders.
Bulk pricing tiers, net terms for qualified buyers, and dedicated support for facility managers and procurement teams.
Hold the product, test the fit, check the finish. We ship samples free so you can evaluate before committing to a full order.
For orders above standard volume tiers, we’ll prepare a custom quote with consolidated shipping and your account’s tier pricing.
Reviews
There are no reviews yet