Every time you drag a chair across hardwood, tile, or laminate, the bare leg scores the surface. Professional-grade furniture glides for hard floors put a PA6 needle-punched fiber barrier between every leg and your floor. Nail-on for solid wood legs. Self-adhesive for metal, plastic, or hollow legs. Smooth Glide for furniture that moves. Anti-Slip for furniture that must stay put. Round and square in five sizes per shape. Rectangular in 33 × 19 mm. Sold in multiples of 4.
Mounting method is the first decision. It depends on your leg material, not your preference.
A zinc-plated steel tubular rivet drives into solid wood with a rubber mallet. The anti-rotation notch molded into the rivet prevents the glide from spinning. No adhesive, no drying time. The mechanical fit is permanent. For solid wood legs only.
EHBF acrylic foam tape bonds to chrome, powder-coated steel, anodized aluminum, plastic, or wood. No tools, no rivet holes. Peel, press, done. For metal, plastic, hollow, or any leg that cannot accept a nail.
PA6 needle-punched fiber or NR+CR anti-slip rubber bonded to an ABS platform with a zinc-plated steel tubular rivet. The rivet drives into solid wood and locks permanently. An anti-rotation notch molded into the rivet prevents spin. 5 sizes per shape in both surfaces.
For round turned legs on dining chairs, bar stools, side tables, and accent furniture.
For square-section legs on parsons chairs, modern dining chairs, and commercial seating.
For rectangular legs on mid-century, Scandinavian, and transitional furniture.
For round legs on furniture that must stay exactly where they’re placed.
For square legs on accent furniture, instrument stands, and fixed commercial seating.
For rectangular legs on furniture that must resist lateral movement on smooth, hard floors.
Same PA6 and NR+CR surfaces as the nail-on range, on the same ABS platform, mounted with EHBF (Extra High Bond Foam) acrylic tape instead of a rivet. Bonds to chrome, powder-coated steel, anodized aluminum, plastic, glass, and wood. Press firmly for 30 seconds. Allow 48 hours before heavy use.
For round legs on metal-frame chairs, stools, and tables.
For square legs on metal and composite-frame furniture.
For rectangular legs on metal-frame and hollow-leg furniture.
For round metal or plastic legs on furniture that must stay in place.
For square metal or plastic legs on fixed-position furniture.
For rectangular metal or plastic legs, where an anti-slip grip is required.
Both use PA6 needle-punched fiber on the same hard floors. The difference is in structure, size range, and mounting.
Need a larger size? Furniture pads cover legs up to 300 × 300 mm. Need to protect carpet? Furniture slides are for carpet and soft floors only.
PA6 needle-punched fiber is chemically inert and leaves no marks, scuffs, or residue on any sealed floor finish. The National Wood Flooring Association (NWFA) recommends protective glides on all furniture legs as a primary floor maintenance measure.
Unsealed concrete, textured tile, natural cleft stone, and floors with wide grout lines wear PA6 fiber prematurely. For these surfaces, use furniture slides with a hard ABS base that handles abrasive textures without degrading.
Furniture glides are for hard floors only. For carpet and rugs, use furniture slides →
Any hard-floor space where furniture moves regularly. For bulk and commercial orders, visit Business Solutions.
Nail-on takes under a minute per leg. Self-adhesive takes 30 seconds per leg plus a 48-hour cure time.
Full installation guide with tips for tapered legs, replacement, and tricky surfaces: Read the installation guide →
Get it right before you order.
