Round foam self-adhesive furniture pads combine EVA closed-cell foam with a PA6 needle-punched fiber floor-contact surface. Vibration absorbing pads round furniture needs for noise reduction and floor protection on hardwood, tile, laminate, vinyl, and stone. Dampens vibration transfer from appliances, speakers, equipment, and heavy furniture. EHBF acrylic foam adhesive bonds to any leg material. 31 sizes from Ø 18 mm to Ø 300 mm.
Not sure what size? See the size chart ↓
📦 Sold in packs of 4 — quantity adjustable at checkout
Furniture that rocks on a flat floor has uneven legs. And a flat, rigid pad can’t fix a problem it can’t conform to. You press the pad onto the leg, set the furniture down, and the same corner lifts. The wobble is still there. The floor is still getting damaged at the two contact points carrying all the weight. Round foam self-adhesive furniture pads add an EHBF acrylic foam layer between the PA6 surface and the EHBF adhesive. The foam compresses where the leg is high and fills the gap where the leg is low. Full contact across the entire base, even when the base isn’t perfectly flat. No wobble. No concentrated pressure points grinding into your floor.
31 sizes from Ø 18 mm to Ø 300 mm. Same PA6 needle-punched fiber surface: silent, low-friction, chemically inert. Same floor protection on hardwood, tile, laminate, vinyl, and stone. Round foam self-adhesive furniture pads are available in multiples of 4. For wood, metal, and plastic legs.
Round foam self-adhesive furniture pads for hard floors are available in 31 diameters from Ø 18 mm to Ø 300 mm. The right round foam self-adhesive furniture pad sits flush inside the leg footprint. An oversized pad overhangs and catches, an undersized pad misses the edges where the wobble originates. With 31 sizes at 10 mm increments, there’s a near-exact match for every round furniture leg.
Chairs, stools, side tables, desks, accent furniture. The everyday furniture most likely to wobble because of minor manufacturing inconsistencies in the leg bases.
Sizes: Ø 18, 20, 23, 30, 40, 50, 60, 70 mm
8 sizes
Tables, cabinets, bed frames, appliances, equipment bases. The larger bases that are most likely to have warping, uneven surfaces, or vibration that the foam layer can dampen.
Sizes: Ø 80, 90, 100, 110, 120, 130, 140, 150, 160, 170, 180, 190, 200, 210, 220, 230, 240, 250, 260, 270, 280, 290, 300 mm
23 sizes
For bulk orders and commercial fit-outs, visit Business Solutions.
Same process as standard pads: measure the diameter of the flat base in millimeters and pick the closest size. The foam layer adds thickness but doesn’t change how you measure. If your measurement falls between two sizes, go smaller. A round foam self-adhesive furniture pad inside the footprint stays bonded and the foam does its conforming work across the full contact area.
Lay it on its side or turn it upside down. You need to see the bottom of each leg. The uneven surface the round foam self-adhesive furniture pad will conform to.
Straight across the widest point of the round base, in millimeters. A ruler or tape measure works.
Between sizes? Go smaller. The foam conforms. It doesn’t need to overhang to work. A round foam self-adhesive furniture pad inside the footprint bridges gaps and eliminates wobble across the full base diameter.
Same peel-and-press installation as all our pads. No tools. No drilling. The foam layer actually makes round foam self-adhesive furniture pads slightly more forgiving during application. The foam conforms to minor surface imperfections on the leg base, improving adhesive contact from the start. You don’t need a perfectly smooth leg surface for the foam to do its job.
Same chemically inert PA6 surface as all our pads. It won’t react to your floor sealer, wax, or cleaning products. The National Wood Flooring Association (NWFA) recommends protective pads on all furniture legs. Round foam self-adhesive furniture pads meet both standards across every smooth hard floor type.
Three layers in every round foam self-adhesive furniture pad for hard floors. The PA6 surface protects the floor. The EHBF mesh holds the structure together. The EHBF foam conforms to the imperfect leg base. Here’s what each layer does. And why the foam changes everything for furniture that doesn’t sit flat.
Same 1,450 g/m² pile density as all our pads and glides. Fibers mechanically interlocked by needle-punching. No glue, no layers to separate. Low friction, chemically inert, deflects debris instead of trapping it. The PA6 layer on round foam self-adhesive furniture pads provides the floor protection: everything underneath is about getting full contact between this surface and your floor, even when the leg base isn’t cooperating.
The fiberglass mesh layer that bonds the PA6 surface to the foam layer underneath. It provides structural integrity across the pad: keeping the PA6 surface flat and even while the foam beneath it conforms to the uneven leg base. Without the EHBF mesh, the PA6 surface would deform to match the foam contour, reducing floor contact quality.
This is what makes round foam self-adhesive furniture pads different from every other pad in the range. The EHBF acrylic foam layer compresses where the leg surface is high and maintains its full thickness where the leg surface is low: automatically bridging gaps of up to several millimeters. When you set the furniture down, the weight drives the foam into full contact with every contour of the imperfect leg base.
The foam also reduces sound transmission and dampens vibration: if the furniture sits on a hard floor in an apartment building, the foam absorbs the micro-vibrations that would otherwise transfer through the leg and radiate through the floor structure. Same benefit for appliances and equipment that vibrate during operation.
Standard round pads use EHBF mesh adhesive directly on the leg: rigid, no give. Perfect for flat, level leg bases on flat floors. But if the leg base has any unevenness, warping, or imperfection, the rigid adhesive can’t bridge the gap. The pad bonds at the high points and lifts at the low points. The furniture still wobbles. The floor still gets damaged at the concentrated contact points.
Round foam self-adhesive furniture pads fill those imperfections automatically. The EHBF foam compresses at the high spots and fills the low spots: under nothing more than the weight of the furniture itself. Full contact, no wobble, even weight distribution.
Folded cardboard under the leg. Coins stacked under the short foot. Wooden shims from the hardware store. These improvised fixes address the wobble but leave the floor completely unprotected. And they slip out, get kicked, or compress unevenly over time. Round foam self-adhesive furniture pads fix the wobble and protect the floor in one step. The foam is Securely bonded to the leg, not wedged underneath.
Silicone and rubber conform to uneven surfaces. That much they get right. But they grip the floor instead of sliding. For furniture that needs to move: dining chairs, desk chairs, stools. That grip creates the resistance that strains your back and drags the leg edge across the finish. Some rubber compounds also stain floors over time. Round foam self-adhesive furniture pads conform like rubber but slide like PA6. The foam handles the unevenness, the PA6 handles the floor.
Felt is sometimes marketed as “cushioned” or “soft”: implying it can conform to imperfect surfaces. It can’t. Felt compresses flat under weight, eliminating any gap-bridging effect within days. Then it starts trapping grit and acting as sandpaper. Round foam self-adhesive furniture pads use engineered EHBF acrylic foam that maintains its compression profile under sustained load. It doesn’t go flat, and the PA6 surface on top doesn’t trap grit.
Three versions of round self-adhesive furniture pads. Same PA6 surface on all three. Same floor protection. The difference is underneath.
Single PA6 + EHBF. Thinnest profile. 33 sizes from Ø 12 mm. For flat, level legs on flat floors. If the furniture doesn’t wobble, start here.
Double PA6 + EHBF. 28 sizes from Ø 30 mm. For heavy furniture that wears through standard pads.
Single PA6 + EHBF + EHBF acrylic foam. 31 sizes from Ø 18 mm. For uneven legs, vibration dampening, and furniture that wobbles on flat floors.
All three versions protect hard floors equally well. Standard for everyday. Heavy-duty for punishment. Foam for imperfect surfaces.
Match the pad shape to the leg shape. Measure the base and pick accordingly.
For round legs with uneven bases. 31 sizes from Ø 18 mm to Ø 300 mm.
For square legs with uneven bases. 31 sizes from 18 × 18 mm to 300 × 300 mm.
For rectangular legs and sled bases with warped or bowed runners. 100+ sizes.
Anywhere round furniture wobbles, vibrates, or has imperfect leg bases on a hard floor. Round foam self-adhesive furniture pads solve two problems at once. The wobble and the floor protection. For bulk and commercial orders, visit Business Solutions.
The dining table that’s always rocked: you’ve shimmed it with cardboard, tried folding napkins under the leg, even sanded the base. The chair that wobbles on one leg. Older furniture with slightly warped bases from decades of use. Appliances that vibrate: washing machines, dryers, dishwashers, refrigerators. Round foam self-adhesive furniture pads fix the wobble and protect the floor at the same time, without shimming, leveling, or sanding anything.
Restaurant furniture on floors that aren’t perfectly level (old buildings, settled foundations, transitions between floor materials). Office equipment that vibrates: printers, copiers, servers. Display fixtures with mass-produced bases that vary slightly from unit to unit. Any commercial environment where furniture wobble is a nuisance, a noise issue, or a safety concern. Round foam self-adhesive furniture pads are available in bulk for commercial installations.
Round Standard Pads: single PA6 + EHBF for flat, level legs. 33 sizes from Ø 12 mm.
Round Heavy-Duty Pads: double PA6 for heavy furniture. 28 sizes from Ø 30 mm.
Round Self-Adhesive Glides. PA6 on ABS platform for high-use chairs. 5 sizes.
Round Nail-On Glides. PA6 on ABS with rivet for solid wood legs. 5 sizes.
| Specification | Details |
|---|---|
Product Type |
Self-Adhesive Pads |
Pad Type |
Foam |
Shape |
Round |
Materials |
Hardwood, tile, laminate, LVT, vinyl plank, polished concrete, epoxy, etc |
Floor Compatibility |
Chairs, stools, benches, tables, desks, round bases |
Furniture Compatibility |
Wooden, metal, and plastic furniture legs with round, curved, or angled profiles |
Leg Compatibility |
Glides furniture smoothly without damaging the floor surface. Helps reduce noise and protect floor finishes. |
Sizes Available |
18 mm – 300 mm (0.71″ – 11.81″) |
Color Options |
Black |
Installation Type |
Peel backing and press onto clean leg surface (wipe with 70% isopropyl alcohol first) |
Key Benefits |
Levels uneven furniture, absorbs impact, waterproof hold, reduces noise and friction |
Indoor/Outdoor Use |
Indoor | Covered Outdoor |
| Shape | Ø (Diameter) | Compatible Leg/Base Size | H (Height) |
|---|---|---|---|
Round |
18 mm (0.71") |
18 – 19 mm (0.71 – 0.75″) |
7 mm (0.28”) |
Round |
20 mm (0.79") |
20 – 22 mm (0.79 – 0.87″) |
7 mm (0.28”) |
Round |
23 mm (0.91") |
23 – 29 mm (0.91 – 1.14″) |
7 mm (0.28”) |
Round |
30 mm (1.18") |
30 – 39 mm (1.18 – 1.53″) |
7 mm (0.28”) |
Round |
40 mm (1.57") |
40 – 49 mm (1.57 – 1.93″) |
7 mm (0.28”) |
Round |
50 mm (1.97") |
50 – 59 mm (1.97 – 2.32″) |
7 mm (0.28”) |
Round |
60 mm (2.36") |
60 – 69 mm (2.36 – 2.71″) |
7 mm (0.28”) |
Round |
70 mm (2.76") |
70 – 74 mm (2.75 – 2.91″) |
7 mm (0.28”) |
Round |
80 mm (3.15") |
80 – 89 mm (3.14 – 3.50″) |
7 mm (0.28”) |
Round |
90 mm (3.54") |
90 – 99 mm (3.54 – 3.90″) |
7 mm (0.28”) |
Round |
100 mm (3.94") |
100 – 109 mm (3.93 – 4.29″) |
7 mm (0.28”) |
Round |
110 mm (4.33") |
110 – 119 mm (4.33 – 4.69″) |
7 mm (0.28”) |
Round |
120 mm (4.72") |
120 – 129 mm (4.72 – 5.08″) |
7 mm (0.28”) |
Round |
130 mm (5.12") |
130 – 139 mm (5.12 – 5.47″) |
7 mm (0.28”) |
Round |
140 mm (5.51") |
140 – 149 mm (5.51 – 5.87″) |
7 mm (0.28”) |
Round |
150 mm (5.91") |
150 – 159 mm (5.91 – 6.26″) |
7 mm (0.28”) |
Round |
160 mm (6.30") |
160 – 169 mm (6.30 – 6.65″) |
7 mm (0.28”) |
Round |
170 mm (6.69") |
170 – 179 mm (6.70 – 7.05″) |
7 mm (0.28”) |
Round |
180 mm (7.09") |
180 – 189 mm (7.09 – 7.44″) |
7 mm (0.28”) |
Round |
190 mm (7.48") |
190 – 199 mm (7.48 – 7.83″) |
7 mm (0.28”) |
Round |
200 mm (7.87") |
200 – 209 mm (7.87 – 8.23″) |
7 mm (0.28”) |
Round |
210 mm (8.27") |
210 – 219 mm (8.27 – 8.62″) |
7 mm (0.28”) |
Round |
220 mm (8.66") |
220 – 229 mm (8.66 – 9.01″) |
7 mm (0.28”) |
Round |
230 mm (9.06") |
230 – 239 mm (9.05 – 9.41″) |
7 mm (0.28”) |
Round |
240 mm (9.45") |
240 – 249 mm (9.45 – 9.80″) |
7 mm (0.28”) |
Round |
250 mm (9.84") |
250 – 259 mm (9.84 – 10.2″) |
7 mm (0.28”) |
Round |
260 mm (10.24") |
260 – 269 mm (10.23 – 10.59″) |
7 mm (0.28”) |
Round |
270 mm (10.63") |
270 – 279 mm (10.63 – 10.98″) |
7 mm (0.28”) |
Round |
280 mm (11.02") |
280 – 289 mm (11.02 – 11.38″) |
7 mm (0.28”) |
Round |
290 mm (11.42") |
290 – 300 mm (11.42 – 11.77″) |
7 mm (0.28”) |
Round |
300 mm (11.81") |
300 mm + (11.81″) |
7 mm (0.28”) |
EVA (ethylene vinyl acetate) closed-cell foam absorbs vibration and dampens noise transfer through the floor. Standard PA6 pads protect the floor surface but transmit vibration directly. Foam pads intercept vibration between the furniture and the floor. This makes them ideal under washing machines, dryers, speakers, treadmills, and any vibrating equipment.
Yes. The EVA foam layer absorbs the vibration that the washing machine generates during the spin cycle. This reduces both the noise transmitted through the floor to rooms below and the rattling/buzzing that vibration causes in adjacent surfaces. Position the pads under each foot of the machine for maximum effect.
Yes. Foam pads work as floor protectors for any furniture. The PA6 surface protects the floor the same way standard pads do. The EVA foam adds cushioning. For non-vibrating furniture where cushioning isn’t needed, standard round pads or heavy-duty round pads may be more cost-effective.
EVA closed-cell foam resists sustained compression better than open-cell foams. The closed cells maintain their structure under load. Under extremely heavy equipment, some initial compression is normal as the foam conforms to the surface. This conforming action actually improves vibration dampening. The foam will not collapse flat under normal furniture loads.
31 sizes from Ø 18 mm to Ø 300 mm. Measure the diameter of the leg or equipment foot at the very bottom. Choose the size that fits inside the footprint. If your measurement lands on a boundary, go with the smaller size.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet