Full corner-to-corner ABS coverage for square furniture legs on carpet. Self-adhesive furniture slides with EHBF acrylic foam tape bond to metal, plastic, and wood legs — no nails, no drilling, no tools. The hard ABS surface glides over carpet pile and rough floors instead of digging in. 4 sizes from 23 × 23 mm to 50 × 50 mm. Available in multiples of 4. Also recommended for rough and textured hard floors.
Not sure what size? See the size chart ↓
📦 Sold in packs of 4 — quantity adjustable at checkout
Square metal, plastic, and hollow tube furniture legs have four corners that dig into carpet pile — and they cannot accept a nail-on rivet. Square self-adhesive furniture slides for carpet solve both problems at once. EHBF (Extra High Bond Foam) acrylic tape bonds the ABS platform directly to any clean, smooth square leg surface, and the hard ABS (Acrylonitrile Butadiene Styrene) face covers every corner edge to edge, gliding over carpet pile instead of digging into it.
Peel the backing, align corners, press firmly, allow 24 hours for full bond strength. 4 sizes from 23 × 23 mm to 50 × 50 mm. Available in multiples of 4. For any leg material — wood, metal, plastic, or hollow tube. For solid wooden legs where maximum hold is preferred, use square nail-on furniture slides for carpet instead. For hard floors, use square self-adhesive furniture glides with PA6 surface.
Square self-adhesive furniture slides for carpet are available in four sizes to match the actual base of the leg. Correct sizing is critical on square legs — an undersized slide leaves corners exposed to catch carpet fibers, and an oversized slide overhangs and snags during movement. Select the correct size to ensure square self-adhesive furniture slides for carpet perform as designed.
For legs 23–27 × 23–27 mm
Lightweight accent furniture, small metal chairs
For legs 28–37 × 28–37 mm
Dining chairs, stacking chairs, side tables
For legs 38–49 × 38–49 mm
Accent chairs, bookcases, heavier metal furniture
For legs 50–74 × 50–74 mm
Dining tables, heavy cabinets — includes EHBF foam layer
The 50 × 50 mm size includes an additional EHBF foam layer between the ABS platform and the sliding surface. This foam distributes the weight of heavy furniture more evenly, dampens vibration, and reduces pile compression on carpet. For bulk orders and commercial fit-outs, visit Business Solutions.
The most common mistake when ordering square self-adhesive furniture slides for carpet is guessing the size. A 23 mm slide on a 38 mm leg wobbles and leaves all four corners digging directly into the carpet pile. Measure both sides of the leg base before ordering.
Lay it on its side or flip it upside down. You need clear access to the base of each leg where the square self-adhesive furniture slide will sit.
Use a steel rule or calipers. Measure across both sides of the leg base independently. If the two measurements differ by more than 3 mm, the leg is rectangular — use rectangular self-adhesive furniture slides instead.
Select the square self-adhesive furniture slide for carpet whose range includes your measurement. When a measurement falls exactly on a boundary (e.g., 38 mm), choose the larger size for full corner coverage.
Installing square self-adhesive furniture slides for carpet takes under a minute per leg — but surface preparation determines whether the bond lasts a year or a week. The EHBF acrylic tape achieves full bond strength in 24 hours. Corner alignment during installation is critical — once the adhesive contacts the leg, repositioning reduces bond strength.
Carpet fights every furniture movement — but square legs make the problem worse. Round legs present a continuous curve that parts carpet fibers somewhat evenly. Square legs present four sharp corners that dig into carpet pile like anchors. Square self-adhesive furniture slides for carpet address this with a hard ABS surface across the full square footprint, including all four high-load corners.
Each corner of an unprotected square leg concentrates the furniture’s weight into a sharp point. When the furniture is pushed or pulled, those four points drag through the carpet pile — tearing fibers, crushing pile, and creating permanent tracks. The Carpet and Rug Institute (CRI) recommends using furniture protectors on all legs to prevent the premature pile damage that concentrated corner pressure causes.
Metal and plastic square legs are worse than wooden ones because they are harder and smoother — they sink deeper into the pile and create sharper indentations. Square self-adhesive furniture slides for carpet are designed specifically for these non-wood leg materials.
The ABS surface on square self-adhesive furniture slides for carpet replaces four sharp corner contact points with a single smooth, flat surface that skims over carpet pile instead of digging through it. The coefficient of friction between smooth ABS and carpet is dramatically lower than between raw metal corners and carpet — turning a two-handed struggle into a one-handed push.
ABS also distributes the furniture’s weight evenly across all four corners instead of concentrating it at four sharp points. This reduces carpet pile compression by spreading the load uniformly — protecting the carpet from the permanent indentations that unprotected square metal and plastic legs create.
These ABS furniture slides are designed for surfaces where furniture legs sink into or engage the material. The hard ABS face skims over the surface instead of engaging it. Square self-adhesive furniture slides for carpet are also recommended for rough or heavily textured hard floors where PA6 glides may catch or wear prematurely.
Every component in square self-adhesive furniture slides for carpet is specified for carpet-specific challenges on non-wood legs. The ABS surface rejects fiber engagement, the EHBF tape provides a mechanical-strength bond to any smooth square leg material, and the ABS platform distributes load to reduce corner-concentrated pile compression.
The ABS sliding surface on square self-adhesive furniture slides for carpet is hard, smooth, and presents zero fiber engagement across the full square footprint. The precision-formed edges and polished face create a surface that carpet fibers cannot grip, snag, or penetrate — including all four corners where fiber engagement is worst on unprotected square legs.
ABS resists the abrasion that carpet generates over time. Where cheap plastic slides develop microscopic scratches that increase fiber engagement, the ABS surface on square self-adhesive furniture slides for carpet maintains its smooth face through years of daily furniture movement. The material will not age-crack, chalk, or become brittle under sustained load.
EHBF is a closed-cell acrylic foam tape that bonds the ABS platform to the furniture leg. Unlike commodity double-sided tape that peels under lateral stress, EHBF achieves mechanical-strength adhesion to smooth metal, painted metal, powder-coated metal, finished wood, and most rigid plastics. The closed-cell foam structure conforms to minor surface irregularities and provides vibration damping between the leg and the slide.
On carpet, furniture movement generates higher lateral forces than on hard floors. Square self-adhesive furniture slides for carpet rely on EHBF’s shear strength to resist these forces without peeling — especially at the corners where lateral stress concentrates during diagonal movement.
The rigid square platform that connects the ABS sliding surface to the EHBF adhesive layer. The platform distributes the furniture’s weight evenly across all four corners — eliminating the concentrated point-loading that causes the worst carpet damage from unprotected square legs.
On the 50 × 50 mm size, an additional EHBF foam layer is incorporated between the platform and the sliding surface. This foam dampens sound and vibration from heavier furniture, distributes weight more evenly under high-load conditions, and reduces pressure on the primary adhesive bond.
Unprotected square metal and plastic legs on carpet are the worst combination for both the carpet and the person moving the furniture. The four hard corners concentrate the furniture’s full weight into four sharp points that dig into the pile, tear fibers, and resist every movement. Metal corners create deeper, sharper indentations than wood because of the harder material.
Square self-adhesive furniture slides for carpet replace those four sharp contact points with a single smooth ABS surface that distributes weight evenly and eliminates fiber engagement during movement.
A round slide inscribed inside a square leg leaves all four corners completely unprotected. Those corners are the highest-load contact points and the first place that catches and tears carpet fibers. Square self-adhesive furniture slides for carpet match the leg profile exactly: full ABS coverage at every corner, every edge, and across the full square footprint.
Square nail-on furniture slides for carpet use a zinc-plated tubular rivet with anti-rotation mortise — the strongest possible connection. But rivets only work on solid wood. If the leg is metal, plastic, hollow tube steel, or aluminum, nail-on installation is not possible. Square self-adhesive furniture slides for carpet provide the same ABS sliding surface with an EHBF adhesive bond that works on every leg material.
Square self-adhesive furniture glides use a PA6 needle-punched surface designed for hard floors. PA6 fibers on carpet create fiber-on-fiber engagement that increases resistance instead of reducing it. Self-adhesive carpet glides with ABS surface reject fiber engagement entirely — same adhesive, different surface for a different floor. Use PA6 glides on hard floors →
Square self-adhesive furniture slides for carpet and square self-adhesive furniture glides for hard floors use the same ABS platform and EHBF adhesive. The right choice depends entirely on the floor type — not the furniture or the leg material.
For carpet, area rugs, and rough textured hard floors. The hard ABS surface skims over carpet pile instead of engaging it. Square self-adhesive furniture slides for carpet eliminate corner snagging and reduce the force needed to move furniture across the full square footprint.
For hardwood, tile, laminate, vinyl, stone, and all smooth hard floors. The soft PA6 needle-punched surface absorbs micro-texture and moves silently without scratching. Glides protect the floor from the furniture — slides protect the furniture from the floor.
Both variants use the same ABS platform and EHBF acrylic tape. Only the floor-contact surface differs — ABS for carpet, PA6 for hard floors.
Square self-adhesive furniture slides for carpet must match the leg cross-section. A round slide on a square leg leaves all four corners exposed to catch and snag on carpet fibers. Measure the base before ordering.
For circular cross-section legs — turned, tapered, cylindrical, and hollow tube. Ø 23 / 28 / 38 / 50 mm.
For equal-sided square legs — metal, plastic, and wood. Full corner-to-corner ABS coverage on carpet. 23 / 28 / 38 / 50 mm.
For oblong legs — mid-century modern and Scandinavian furniture. Full-length ABS coverage. 33 × 19 mm.
Square self-adhesive furniture slides for carpet are ideal for metal-legged dining chairs, kitchen stools, bookcases, cabinets, side tables, and any square-legged furniture on carpeted floors or area rugs. Especially valuable for modern and industrial furniture with square steel tube legs that cannot accept nail-on installation. The 28 × 28 mm and 38 × 38 mm sizes cover the majority of residential metal dining chairs. The peel-and-press installation requires no tools — making it accessible to every homeowner.
Hotel banquet halls, conference rooms, restaurant dining rooms with carpeted floors, assisted living facilities, office furniture on commercial carpet tile, and event venues with stacking chairs. Square self-adhesive furniture slides for carpet are the standard specification for commercial square-legged metal and plastic furniture on carpet — the EHBF bond withstands the daily repositioning that hospitality and office environments demand. The American Society of Interior Designers (ASID) recognizes furniture protectors as essential to commercial floor maintenance. Available in bulk quantities — visit Business Solutions for commercial pricing.
Same ABS sliding surface for carpet. Zinc-plated tubular rivet with anti-rotation mortise instead of EHBF tape — for solid wooden square legs where maximum mechanical hold is preferred.
Same ABS platform and EHBF adhesive. PA6 needle-punched sliding surface instead of ABS — for hardwood, tile, laminate, vinyl, and stone. Use glides when the floor is smooth and hard; use square self-adhesive furniture slides for carpet when the floor is soft or textured.
| Specification | Details |
|---|---|
Product Type |
Self-Adhesive Slides |
Shape |
Square |
Materials |
ABS base, EHBF adhesive |
Floor Compatibility |
Carpets, area rugs, woven mats |
Furniture Compatibility |
Chairs, stools, benches, tables, office seating |
Leg Compatibility |
Wooden, metal, and plastic furniture legs |
Sizes Available |
23×23-50×50 mm (0.91×0.91–1.97×1.97 in) |
Color Options |
Black |
Installation Type |
Peel backing and press onto clean leg surface (wipe with 70% isopropyl alcohol first) |
Key Benefits |
Snag prevention, dent reduction, smooth gliding, strong adhesive bond |
Indoor/Outdoor Use |
Indoor | Covered Outdoor | Uncovered Outdoor |
| Shape | L × W (Dimensions) | Compatible Leg/Base Size | H (Height) |
|---|---|---|---|
Square |
23 × 23 mm (0.91″ × 0.91″) |
23 × 23 – 27 × 27 mm (0.91″ × 0.91″ – 1.06″ × 1.06″) |
7.6 mm (0.30”) |
Square |
28 × 28 mm (1.10″ × 1.10″) |
28 × 28 – 37 × 37 mm (1.10″ × 1.10″ – 1.46″ × 1.46″) |
7.6 mm (0.30”) |
Square |
38 × 38 mm (1.50″ × 1.50″) |
38 × 38 – 49 × 49 mm (1.50″ × 1.50″ – 1.93″ × 1.93″) |
7.6 mm (0.30”) |
Square |
50 × 50 mm (1.97″ × 1.97″) |
50 × 50 – 74 × 74 mm (1.97″ × 1.97″ – 2.91″ × 2.91″) |
7.6 mm (0.30”) |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet