Square self-adhesive furniture glides for hard floors protect smooth hardwood, tile, laminate, vinyl, and stone from square furniture legs of any material — wood, metal, plastic, or hollow tube. Full corner-to-corner PA6 coverage that round glides cannot provide on square legs. EHBF (Extra High Bond Foam) acrylic tape bonds to any clean, smooth leg base without tools. 5 sizes from 23 × 23 mm to 75 × 75 mm. Available in multiples of 4.
Not sure what size? See the size chart ↓
📦 Sold in packs of 4 — quantity adjustable at checkout
Square self-adhesive furniture glides for hard floors protect smooth hardwood, tile, laminate, vinyl, and stone from square furniture legs of any material — wood, metal, plastic, or hollow tube. A round glide on a square leg leaves all four corners unprotected and in direct contact with the floor. These square self-adhesive furniture glides cover every corner edge to edge.
EHBF (Extra High Bond Foam) acrylic tape bonds to any clean, smooth leg base without tools, drilling, or rivets. The PA6 needle-punched sliding surface (1,450 g/m² pile density) moves silently across every smooth hard floor type and outlasts cheap felt pads by years. 5 sizes from 23 × 23 mm to 75 × 75 mm. Available in multiples of 4.
Square self-adhesive furniture glides for hard floors are available in five sizes to match the actual base of the leg. Correct sizing is critical on square legs — an undersized glide leaves the corners unprotected, and an oversized glide overhangs and catches during movement, peeling the adhesive bond.
For legs 23–27 × 23–27 mm
Lightweight accent furniture
For legs 28–37 × 28–37 mm
Dining chairs, side tables
For legs 38–49 × 38–49 mm
Accent chairs, bookcases
For legs 50–74 × 50–74 mm
Dining tables, heavy cabinets
For legs 75 × 75 mm and above
Conference tables, executive furniture
Need a wider range of square sizes? Square self-adhesive furniture pads are available in 31 sizes from 20 × 20 mm to 300 × 300 mm — the same PA6 needle-punched surface with EHBT fiberglass mesh adhesive backing. For bulk orders and commercial fit-outs, visit Business Solutions.
The most common mistake when buying square self-adhesive furniture glides for hard floors is ordering by guesswork. A 28 mm glide on a 38 mm leg wobbles and leaves the corners in direct contact with the floor — the exact points that cause the most damage. Measure before ordering.
Lay it on its side or flip it upside down. You need clear access to the base of each leg where the square self-adhesive furniture glide will sit.
Use a steel rule or calipers. Measure across both sides of the leg base independently. If the two measurements differ by more than 3 mm, the leg is rectangular — use rectangular self-adhesive furniture glides instead.
Select the square self-adhesive furniture glide whose range includes your measurement. When a measurement falls exactly on a boundary (e.g., 38 mm), choose the larger size for full corner coverage.
Installing square self-adhesive furniture glides takes under a minute per leg. No tools required. The EHBF acrylic foam tape bonds to wood, metal, plastic, and most composite surfaces. Corner alignment matters — a rotated glide exposes corners and creates an overhang that catches during movement.
These square self-adhesive furniture glides for hard floors use a chemically inert PA6 surface that does not react to floor sealers, waxes, or cleaning solutions. The National Wood Flooring Association (NWFA) recommends placing protective glides on all furniture legs as a primary measure for maintaining hardwood floor condition. For a full overview of hard floor types and their care requirements, The Spruce’s hard flooring guide provides a useful reference.
Every component in these square self-adhesive furniture glides for hard floors is specified for a particular engineering reason. The PA6 surface slides. The ABS platform distributes load across all four corners. The EHBF tape holds it all permanently to the leg.
1,450 g/m² pile density. PA6 fibers are mechanically interlocked by thousands of barbed needles during manufacturing — not glued. This is what makes PA6 square self-adhesive furniture glides survive the lateral shear forces that destroy cheap felt pads: no adhesive layer to weaken, no compressed layers to separate.
On square legs, corner compression is the first failure point for cheap felt. The four corners bear disproportionate load, crushing the felt flat and packing grit into the horizontal layers. PA6’s vertical fiber orientation distributes compression evenly across the full square surface — including the high-stress corners. The NWFA’s hardwood floor maintenance guidelines cite abrasion from degraded furniture glides as one of the leading causes of preventable hardwood floor finish damage.
Closed-cell acrylic foam tape — the same adhesive technology used in automotive exterior trim and architectural glazing. EHBF conforms to micro-texture on the leg surface, creating mechanical interlock in addition to chemical adhesion.
The foam core absorbs lateral shear forces and vibration that would cause rigid adhesives to crack and fail. On square legs, the four corners generate concentrated stress points on the adhesive during movement — EHBF distributes that stress across the full bonding area instead of failing at the corners first.
The rigid platform that carries both the PA6 surface and the EHBF adhesive layer. ABS distributes the furniture’s weight evenly across all four corners — maximizing PA6 contact at the high-load zones and preventing the uneven compression that causes cheap glides to rock and tilt under load.
Cheap felt pads use horizontally-layered fibers bonded with weak adhesive. On square legs, the four corners bear disproportionate load — crushing the felt flat at the corners first, packing grit into the layers, and eventually scratching your floor at the exact points where the leg concentrates its weight.
PA6 square self-adhesive furniture glides for hard floors have no adhesive layer between fibers. The vertical fiber orientation deflects debris instead of trapping it. And EHBF acrylic foam tape outperforms cheap felt adhesive by an order of magnitude — cheap felt peels off in weeks, EHBF holds for years.
A round glide on a square leg leaves all four corners unprotected. Those corners are the highest-load contact points — the first place the floor gets scratched. A round glide also overhangs on the flat sides of a square leg, creating edges that catch during movement and peel the adhesive bond.
Square self-adhesive furniture glides for hard floors match the leg profile exactly: full PA6 coverage at every corner, every edge, and across the full square footprint. No exposed corners, no overhang, no compromise.
Use square nail-on furniture glides when the legs are solid wood and the furniture moves frequently — the mechanical rivet provides the strongest possible connection. Use square self-adhesive furniture glides when the legs are metal, plastic, hollow tube, or any material that cannot accept a nail-on rivet.
Both use the same PA6 surface and ABS platform. The only difference is the attachment method: tubular rivet with anti-rotation mortise for solid wood, EHBF adhesive for everything else.
Square self-adhesive furniture pads use the same PA6 needle-punched surface but without the ABS platform. They attach directly to the leg base with EHBT fiberglass mesh adhesive tape. Pads are available in 31 sizes from 20 × 20 mm to 300 × 300 mm — a much wider range than the five glide sizes.
Glides are the stronger option for high-use furniture like dining chairs that move hundreds of times a day. The ABS platform provides structural rigidity and even weight distribution across all four corners. For furniture that moves less frequently — tables, bookcases, cabinets — pads provide excellent protection with the widest size selection available.
Square self-adhesive furniture glides come in two surface variants. The right choice depends on how the furniture is used — not the floor type.
For furniture that is regularly repositioned. The low-friction PA6 surface on these square self-adhesive furniture glides for hard floors moves quietly across hardwood, tile, laminate, vinyl, and stone. The standard choice for dining chairs, kitchen seating, and accent furniture.
NR+CR rubber at 30 Shore A provides controlled grip across the full square footprint — including all four corners. Furniture stays exactly where it’s placed. Use for dining tables, bookcases, display furniture, and any environment where an unexpected slide is a safety hazard.
Both variants use the same ABS platform and EHBF adhesive tape. Only the sliding surface differs.
Square self-adhesive furniture glide shape must match the leg cross-section exactly. A round glide on a square leg leaves the corners unprotected. A square glide on a round leg overhangs on all four sides. Measure the base before ordering.
For circular cross-section legs — turned, tapered, cylindrical, and tubular steel. Ø 23 / 28 / 38 / 50 / 75 mm.
For equal-sided square legs — Shaker, mission, farmhouse, and contemporary designs. Full corner-to-corner protection. 23 / 28 / 38 / 50 / 75 mm.
For oblong legs and sled frame contact points — mid-century modern, Scandinavian, and contemporary furniture design.
Square self-adhesive furniture glides for hard floors work on dining chairs, kitchen chairs, bookcases, cabinets, side tables, coffee tables, and any furniture with square legs on smooth hard floors. Especially useful for metal and plastic furniture legs that cannot accept nail-on rivets. The 28 × 28 mm and 38 × 38 mm sizes cover the majority of residential dining and kitchen chairs with square legs.
Restaurant dining furniture, hotel room furniture, conference room tables, office seating, healthcare facility furniture, school and classroom chairs, metal stacking chairs, and event venue furniture with square legs. Square self-adhesive furniture glides for hard floors are the standard choice for commercial square-legged furniture — EHBF bonds to chrome, powder-coated steel, and anodized aluminum without tools. Available in bulk quantities — visit Business Solutions for commercial pricing.
Identical ABS platform and EHBF adhesive. NR+CR rubber surface instead of PA6 — for square-legged furniture that must hold position on smooth hard floors.
Same PA6 sliding surface. Zinc-plated tubular rivet with anti-rotation mortise instead of adhesive — the strongest possible connection for solid wooden square legs under heavy daily use.
| Specification | Details |
|---|---|
Product Type |
Self-Adhesive Furniture Glides |
Shape |
Square |
Materials |
PA6 pad surface, ABS base, EHBF adhesive |
Fit Style |
Adhesive-backed (peel-and-stick) |
Floor Compatibility |
All hard floors |
Furniture Compatibility |
Chairs, bar stools, benches, accent seating, dining furniture, office seating, and other wood-leg, metal-leg, and plastic-leg furniture |
Leg Compatibility |
Wooden, metal, and plastic furniture legs |
Sizes Available |
23 × 23 mm – 75 × 75 mm (0.91" × 0.91" – 2.95" × 2.95") |
Color Options |
Black |
Installation Type |
Peel backing and press onto clean leg surface (wipe with 70% isopropyl alcohol first) |
Key Benefits |
Peel-and-stick application (clean surface with 70% isopropyl alcohol before installing) |
Indoor/Outdoor Use |
Indoor | Covered Outdoor |
| Shape | L × W (Dimensions) | Compatible Leg/Base Size | H (Height) |
|---|---|---|---|
Square |
23 × 23 mm (0.91″ × 0.91″) |
23 × 23 – 27 × 27 mm (0.91″ × 0.91″ – 1.06″ × 1.06″) |
12 mm (0.47") |
Square |
28 × 28 mm (1.10″ × 1.10″) |
28 × 28 – 37 × 37 mm (1.10″ × 1.10″ – 1.46″ × 1.46″) |
12 mm (0.47") |
Square |
38 × 38 mm (1.50″ × 1.50″) |
38 × 38 – 49 × 49 mm (1.50″ × 1.50″ – 1.93″ × 1.93″) |
12 mm (0.47") |
Square |
50 × 50 mm (1.97″ × 1.97″) |
50 × 50 – 74 × 74 mm (1.97″ × 1.97″ – 2.91″ × 2.91″) |
12 mm (0.47") |
Square |
75 × 75 mm (2.95″ × 2.95″) |
75 × 75 mm + (2.95″ × 2.95″) |
12 mm (0.47") |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet