Round anti-slip self-adhesive furniture glides for hard floors keep round-legged furniture exactly where you place it on smooth hardwood, tile, laminate, vinyl, and stone. The 30 Shore A NR+CR (Natural Rubber + Chloroprene Rubber) surface grips the floor under compression. EHBF (Extra High Bond Foam) acrylic tape bonds to any clean, smooth leg base — wood, metal, plastic, or hollow tube — without tools. 5 sizes from Ø 23 mm to Ø 75 mm. Available in multiples of 4.
Not sure what size? See the size chart ↓
📦 Sold in packs of 4 — quantity adjustable at checkout
Round anti-slip self-adhesive furniture glides for hard floors keep round-legged furniture exactly where you place it on smooth hardwood, tile, laminate, vinyl, and stone. The 30 Shore A NR+CR (Natural Rubber + Chloroprene Rubber) surface grips the floor under compression — preventing the passive drift, creep, and migration that smooth floors cause under even heavy furniture.
EHBF (Extra High Bond Foam) acrylic tape bonds to any clean, smooth leg base — wood, metal, plastic, or hollow tube — without tools, drilling, or rivets. Where nail-on anti-slip glides require solid wood, these round anti-slip self-adhesive furniture glides work on any leg material. 5 sizes from Ø 23 mm to Ø 75 mm. Available in multiples of 4.
Round anti-slip self-adhesive furniture glides for hard floors are available in five diameters to match the actual base of the leg. Correct sizing is critical on anti-slip glides — the NR+CR rubber surface needs full contact with the floor to deliver maximum grip. An undersized glide reduces the rubber contact area and grip strength proportionally.
For legs Ø 23–27 mm
Side chairs, lightweight accent furniture
For legs Ø 28–37 mm
Accent chairs, side tables, bar stools
For legs Ø 38–49 mm
Lounge chairs, heavier seating
For legs Ø 50–74 mm
Dining tables, coffee tables, sofas
For legs Ø 75 mm and above
Conference tables, heavy commercial furniture
For bulk orders and commercial fit-outs, visit Business Solutions. Need a wider range of round sizes for standard PA6 protection? Round self-adhesive furniture pads are available in 33 diameters from Ø 12 mm to Ø 300 mm.
Correct sizing is even more important on anti-slip glides than on standard PA6 glides. Every square millimeter of NR+CR rubber contact contributes to grip strength — an undersized round anti-slip self-adhesive furniture glide reduces the rubber-to-floor contact area and grip strength proportionally. Take 30 seconds to measure before you order.
Lay it on its side or flip it upside down. You need clear access to the base of each leg where the round anti-slip self-adhesive furniture glide will sit.
Use a steel rule or calipers. Measure straight across the widest point of the leg base. For turned legs that taper, measure at the very bottom — the actual contact point with the floor.
Select the round anti-slip self-adhesive furniture glide whose range includes your measurement. When a measurement falls on a boundary (e.g., 38 mm), choose the larger size — more rubber contact area means stronger grip.
Installing round anti-slip self-adhesive furniture glides takes under a minute per leg. No tools required. The EHBF acrylic foam tape bonds to wood, metal, plastic, and most composite surfaces.
Not every piece of furniture should move freely. Accent chairs, side tables, display furniture, bookcases, sofa end tables — anything that needs to stay exactly where you place it. On smooth hard floors, even heavy furniture drifts over time from nothing more than daily use, vibration, and micro-movements.
Hardwood, tile, laminate, vinyl, polished concrete — every smooth floor type has a low coefficient of friction by design. The same low friction that makes them easy to clean also lets furniture migrate millimeters at a time. Those millimeters accumulate into visible displacement that scratches floors and creates tripping hazards.
Round anti-slip self-adhesive furniture glides for hard floors solve this by placing a high-friction NR+CR rubber surface between the leg and the floor. The rubber conforms to floor micro-texture under compression, and grip increases with furniture weight rather than decreasing.
These round anti-slip self-adhesive furniture glides for hard floors use a chemically inert NR+CR rubber surface that does not react to floor sealers, waxes, or cleaning solutions. The rubber will not stain, discolor, or mark finished floors. The National Wood Flooring Association (NWFA) recommends placing protective glides on all furniture legs as a primary measure for maintaining hardwood floor condition.
Every component in these round anti-slip self-adhesive furniture glides for hard floors is specified for a particular engineering reason. The NR+CR rubber grips the floor. The ABS platform distributes load. The EHBF tape holds it all permanently to the leg — even under the resistance forces that anti-slip rubber generates.
The NR+CR rubber surface on these round anti-slip self-adhesive furniture glides is rated at 30 Shore A hardness — soft enough to conform to micro-texture on smooth hard floors, firm enough to support furniture weight without excessive compression. The Shore A durometer scale measures rubber hardness — 30A is the ideal balance between soft grip compounds and structural rubber for floor-contact applications.
The heavier the furniture, the stronger the grip. NR+CR provides high static friction that increases under load rather than decreasing. Resistant to ozone, UV, and common household chemicals. Will not stain, discolor, or leave marks on finished floors.
Closed-cell acrylic foam tape — the same adhesive technology used in automotive exterior trim and architectural glazing. EHBF conforms to micro-texture on the leg surface, creating mechanical interlock in addition to chemical adhesion.
On anti-slip glides, the adhesive works harder than on standard PA6 glides. Every lateral force on the furniture translates into tension on the glide-to-leg bond — the harder the rubber grips the floor, the harder it pulls against the mounting. EHBF’s foam core absorbs these resistance forces by flexing rather than fracturing, maintaining bond integrity under the dynamic loading that anti-slip rubber creates.
The rigid platform that carries both the NR+CR rubber surface and the EHBF adhesive layer. ABS distributes the furniture’s weight evenly across the full rubber contact surface — maximizing grip. Without the rigid platform, the rubber would compress unevenly under point loads, reducing effective contact area and grip strength.
Cheap stick-on rubber pads and silicone dots use thin material on a weak adhesive backing. The rubber grips the floor but the adhesive cannot handle the resistance forces — within weeks, cheap rubber pads peel off and end up on the floor instead of the furniture leg.
Round anti-slip self-adhesive furniture glides for hard floors use 30 Shore A NR+CR rubber on a rigid ABS platform bonded with EHBF acrylic foam tape. The foam core absorbs resistance forces instead of peeling. The rubber is thick enough to conform to floor micro-texture. The bond holds for years, not weeks.
Rubber leg caps slide over the end of the leg and rely on friction fit to stay in place. On smooth finished surfaces — chrome, powder-coated steel, polished wood — that friction fit loosens quickly. Temperature changes, humidity cycles, and daily use all cause gradual slippage.
Round anti-slip self-adhesive furniture glides bond directly to the leg base face with EHBF foam tape. They cannot slip off, fall off, or loosen. The NR+CR rubber provides superior grip compared to commodity rubber caps, and the ABS platform prevents the uneven compression that causes caps to rock and tilt.
Use round anti-slip nail-on furniture glides when the legs are solid wood — the mechanical rivet provides the strongest possible connection under the resistance forces that anti-slip rubber generates. Use round anti-slip self-adhesive furniture glides when the legs are metal, plastic, hollow tube, or any material that cannot accept a rivet.
Both use the same NR+CR rubber surface and ABS platform. The only difference is the attachment method: tubular rivet for solid wood, EHBF adhesive for everything else.
Round self-adhesive furniture pads use a PA6 needle-punched surface — designed to slide, not grip. They are available in 33 diameters from Ø 12 mm to Ø 300 mm and are an excellent choice for furniture that should move freely on smooth hard floors in a size not available in the glide range.
If you need anti-slip grip, pads are not the right product — use these round anti-slip self-adhesive furniture glides instead. For standard PA6 floor protection without anti-slip, pads provide the widest size selection with a simpler installation.
Round self-adhesive furniture glides come in two surface variants. Round anti-slip self-adhesive furniture glides use NR+CR rubber for grip; standard glides use PA6 for smooth sliding. The right choice depends on how the furniture is used — not the floor type.
For furniture that is regularly repositioned. The low-friction PA6 surface moves quietly across hardwood, tile, laminate, vinyl, and stone with minimal effort. The standard choice for dining chairs, desk seating, and furniture where ease of movement is the priority.
NR+CR rubber at 30 Shore A provides controlled grip. Furniture stays exactly where it’s placed. The right choice for accent furniture, display pieces, restaurant tables, boat cabin furniture, and any environment where an unexpected slide is a safety hazard.
Both variants use the same ABS platform and EHBF adhesive tape. Only the surface material differs — PA6 for low friction, NR+CR for high friction.
Anti-slip self-adhesive furniture glide shape must match the leg cross-section exactly. On anti-slip glides, shape match matters even more than on standard PA6 — every square millimeter of rubber-to-floor contact contributes to grip strength. Measure the base before ordering.
For circular cross-section legs — turned, tapered, cylindrical, and tubular steel. Ø 23 / 28 / 38 / 50 / 75 mm.
For equal-sided square legs. Full corner-to-corner rubber grip that round glides cannot provide on square legs.
For oblong legs and sled frame contact points — mid-century modern and Scandinavian furniture design. 33 × 19 mm.
Round anti-slip self-adhesive furniture glides for hard floors are ideal for accent chairs, side tables, sofa end tables, bookcases, display cabinets, TV stands, bar stools, and any round-legged furniture that should stay in position on smooth hard floors. Especially useful for metal and plastic legs that cannot accept nail-on rivets. The Ø 28 mm and Ø 38 mm sizes cover the majority of residential accent furniture.
Restaurant tables with metal legs, hotel lobby furniture, healthcare waiting room seating, retail display fixtures, boat cabin furniture, and RV built-ins. Round anti-slip self-adhesive furniture glides for hard floors are the preferred choice for commercial metal-legged furniture where unexpected movement creates a liability. EHBF bonds to chrome, powder-coated steel, and anodized aluminum without tools. Available in bulk quantities — visit Business Solutions for commercial pricing.
Identical ABS platform and EHBF adhesive. PA6 low-friction sliding surface instead of NR+CR rubber — for round-legged furniture that should glide freely on smooth hard floors.
Same NR+CR rubber surface. Zinc-plated tubular rivet instead of adhesive — the strongest possible connection for solid wooden legs under the resistance forces that anti-slip rubber generates.
| Specification | Details |
|---|---|
Product Type |
Anti-Slip Self-Adhesive Glides |
Shape |
Round |
Materials |
ABS plastic body, NR + CR anti-slip surface, EHBF adhesive |
Fit Style |
Adhesive-backed (peel-and-stick) |
Floor Compatibility |
Hardwood, tile, laminate, LVT, concrete, stone, etc |
Furniture Compatibility |
Chairs, stools, benches, tables, office seating |
Leg Compatibility |
Wooden, metal, and plastic furniture legs |
Sizes Available |
23–75 mm (0.91–2.95 in) |
Color Options |
Black |
Installation Type |
Peel backing and press onto clean leg surface (wipe with 70% isopropyl alcohol first) |
Key Benefits |
Anti-slip stability, scratch protection, smooth gliding, strong adhesive bond |
Indoor/Outdoor Use |
Indoor | Covered Outdoor |
| Shape | L × W (Dimensions) | Compatible Leg/Base Size | H (Height) |
|---|---|---|---|
Square |
23 × 23 mm (0.91″ × 0.91″) |
23 × 23 – 27 × 27 mm (0.91″ × 0.91″ – 1.06″ × 1.06″) |
12 mm (0.47”) |
Square |
28 × 28 mm (1.10″ × 1.10″) |
28 × 28 – 37 × 37 mm (1.10″ × 1.10″ – 1.46″ × 1.46″) |
12 mm (0.47”) |
Square |
38 × 38 mm (1.50″ × 1.50″) |
38 × 38 – 49 × 49 mm (1.50″ × 1.50″ – 1.93″ × 1.93″) |
12 mm (0.47”) |
Square |
50 × 50 mm (1.97″ × 1.97″) |
50 × 50 – 74 × 74 mm (1.97″ × 1.97″ – 2.91″ × 2.91″) |
12 mm (0.47”) |
Square |
75 × 75 mm (2.95″ × 2.95″) |
75 × 75 mm + (2.95″ × 2.95″) |
12 mm (0.47”) |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet