Metal sled frames on carpet are nearly immovable without the right slide. Rectangular self-adhesive furniture slides with a hard ABS surface glide over carpet pile effortlessly. EHBF acrylic foam tape bonds to metal, plastic, and wood frames. Matches the elongated footprint of sled bases and narrow rails — no exposed edges to catch on carpet fibers. 33 × 19 mm. Available in multiples of 4. The only option for metal sled frames on carpet. Also recommended for rough and textured hard floors.
Not sure what size? See the size chart ↓
📦 Sold in packs of 4 — quantity adjustable at checkout
Metal sled frames, aluminum rails, and plastic oblong legs on carpet are nearly immovable without the right slide — and none of them can accept a nail-on rivet. Rectangular self-adhesive furniture slides for carpet solve both problems at once. EHBF (Extra High Bond Foam) acrylic tape bonds the ABS platform directly to any clean, smooth rectangular leg or frame surface, and the hard ABS (Acrylonitrile Butadiene Styrene) face covers the full oblong footprint edge to edge, gliding over carpet pile instead of digging into it.
Peel the backing, align the long axis, press firmly, allow 24 hours for full bond strength. One size: 33 × 19 mm (1.30″ × 0.75″), fitting legs and frames up to 40 × 25 mm. Available in multiples of 4. For any leg material — wood, metal, plastic, or hollow tube. For solid wooden legs where maximum hold is preferred, use rectangular nail-on furniture slides for carpet instead. For hard floors, use rectangular self-adhesive furniture glides with PA6 surface.
Rectangular self-adhesive furniture slides for carpet are available in one size designed for the compact oblong legs and sled frame contact points found on mid-century modern, Scandinavian, and contemporary metal furniture. Confirm the fit before ordering to ensure rectangular self-adhesive furniture slides for carpet cover the full oblong base without overhang or exposed edges.
For legs and frame contact points 33–40 × 19–25 mm
Mid-century chairs, Scandinavian dining chairs, metal sled-base stools, bar stools with oblong rails
For bulk orders and commercial fit-outs, visit Business Solutions.
Rectangular legs and sled frame contact points require two measurements — the long side and the short side. Both must fall within the 33–40 mm × 19–25 mm range for rectangular self-adhesive furniture slides for carpet to fit correctly. On sled frames, measure the flat contact area at the base of the frame — not the frame tube diameter.
Lay it on its side or flip it upside down. You need clear access to the base of each leg or each sled frame contact point where the slide will sit.
Use a steel rule or calipers. Measure the long side and the short side of the contact area independently. If both sides are within 3 mm of each other, the leg is square — use square self-adhesive furniture slides instead.
The long side must measure between 33 and 40 mm. The short side must measure between 19 and 25 mm. If both fall within range, rectangular self-adhesive furniture slides for carpet are the correct choice.
Installing rectangular self-adhesive furniture slides for carpet takes under a minute per contact point — but surface preparation determines whether the bond lasts a year or a week. The EHBF acrylic tape achieves full bond strength in 24 hours. Directional alignment is critical — once the adhesive contacts the leg, repositioning reduces bond strength.
Rectangular legs encounter asymmetric resistance on carpet. Movement along the short axis pushes the long edge through the pile like a blade — maximum fiber engagement and maximum resistance. Movement along the long axis pushes the narrow edge, generating less resistance. Rectangular self-adhesive furniture slides for carpet eliminate this asymmetry by presenting a smooth ABS surface in every direction of movement.
Each unprotected rectangular leg or sled frame rail presents two long edges that act as blades through carpet pile. Metal sled frames are particularly destructive — they are harder and narrower than wooden legs, and their long contact rails concentrate force along a linear path. The Carpet and Rug Institute (CRI) identifies furniture movement as a leading cause of premature pile damage on residential and commercial carpet.
Over time, unprotected sled frames create distinctive linear tracks in carpet that are wider, deeper, and harder to restore than the circular indentations from round-legged furniture. Rectangular self-adhesive furniture slides for carpet eliminate that blade-like contact by distributing weight across the full ABS face.
The ABS surface on rectangular self-adhesive furniture slides for carpet replaces two long blade edges and four sharp corners with a single smooth, flat surface that skims over carpet pile regardless of movement direction. The coefficient of friction between smooth ABS and carpet is the same in every direction — eliminating the asymmetric resistance that makes sled-frame furniture the most difficult to move on carpet.
ABS also distributes the furniture’s weight evenly across the full rectangular footprint instead of concentrating it along the edges. This converts the linear pressure pattern that causes track-like carpet damage into uniform surface pressure that the carpet pile can support without permanent deformation.
These ABS furniture slides are designed for surfaces where furniture legs sink into or engage the material. The hard ABS face skims over the surface instead of engaging it. Rectangular self-adhesive furniture slides for carpet are also recommended for rough or heavily textured hard floors where PA6 glides may catch or wear prematurely.
Every component in rectangular self-adhesive furniture slides for carpet is specified for carpet-specific challenges on non-wood legs and sled frames. The ABS surface rejects fiber engagement, the EHBF tape provides a mechanical-strength bond to any smooth rectangular contact surface, and the ABS platform distributes load to reduce linear pile compression.
The ABS sliding surface on rectangular self-adhesive furniture slides for carpet is hard, smooth, and presents zero fiber engagement across the full oblong footprint. The precision-formed edges and polished face create a surface that carpet fibers cannot grip, snag, or penetrate — including along the two long edges where fiber engagement is worst on unprotected rectangular legs and sled rails.
ABS resists the abrasion that carpet generates over time. Where cheap plastic slides develop microscopic scratches that increase fiber engagement, the ABS surface on rectangular self-adhesive furniture slides for carpet maintains its smooth face through years of daily furniture movement. The material will not age-crack, chalk, or become brittle under sustained load.
EHBF is a closed-cell acrylic foam tape that bonds the ABS platform to the furniture leg or sled frame. Unlike commodity double-sided tape that peels under lateral stress, EHBF achieves mechanical-strength adhesion to smooth metal, chrome, powder-coated steel, finished wood, and most rigid plastics. The closed-cell foam structure conforms to minor surface irregularities on sled frame rails and provides vibration damping.
On carpet, rectangular contacts generate asymmetric lateral forces — higher resistance when moving across the long edge. Rectangular self-adhesive furniture slides for carpet rely on EHBF’s shear strength to resist these directional forces without peeling, regardless of which direction the furniture is pushed or pulled.
The rigid rectangular platform that connects the ABS sliding surface to the EHBF adhesive layer. The platform distributes the furniture’s weight evenly across the full oblong footprint — eliminating the concentrated linear pressure along the long edges that causes the worst carpet damage from unprotected rectangular legs and sled frames.
Unprotected metal sled frames and rectangular legs on carpet present two long edges that act as blades through the pile during every movement. The resulting fiber damage is wider, more visible, and harder to restore than damage from round or square legs. Rectangular self-adhesive furniture slides for carpet replace those blade-like edges with a smooth ABS surface that distributes weight evenly and eliminates directional fiber engagement.
A round slide on a rectangular leg leaves both long edges and all four corners exposed. A square slide overhangs on two sides and leaves the other two sides short. Neither shape matches the oblong profile. Rectangular self-adhesive furniture slides for carpet match the leg profile exactly — full ABS coverage along both long edges, both short edges, and all four corners.
Rectangular nail-on furniture slides for carpet use a zinc-plated tubular rivet with anti-rotation mortise — the strongest possible connection. But rivets only work on solid wood. Metal sled frames, aluminum rails, and plastic legs cannot accept a rivet. Rectangular self-adhesive furniture slides for carpet are the only option for these materials — and EHBF tape delivers a bond that withstands years of daily carpet use.
Rectangular self-adhesive furniture glides use a PA6 needle-punched surface designed for hard floors. PA6 fibers on carpet create fiber-on-fiber engagement that increases resistance — especially along the long edges where contact area is greatest. Self-adhesive carpet slides with ABS surface reject fiber engagement entirely. Use PA6 glides on hard floors →
Rectangular self-adhesive furniture slides for carpet and rectangular self-adhesive furniture glides for hard floors use the same ABS platform and EHBF adhesive. The right choice depends entirely on the floor type — not the furniture or the leg material.
For carpet, area rugs, and rough textured hard floors. The hard ABS surface skims over carpet pile instead of engaging it. Rectangular self-adhesive furniture slides for carpet eliminate directional snagging and reduce the force needed to move sled-frame and oblong-legged furniture in every direction.
For hardwood, tile, laminate, vinyl, stone, and all smooth hard floors. The soft PA6 needle-punched surface absorbs micro-texture and moves silently without scratching. Glides protect the floor from the furniture — slides protect the furniture from the floor.
Both variants use the same ABS platform and EHBF acrylic tape. Only the floor-contact surface differs — ABS for carpet, PA6 for hard floors.
Rectangular self-adhesive furniture slides for carpet must match the leg cross-section. A round or square slide on a rectangular leg leaves edges exposed to catch and snag on carpet fibers. Measure both dimensions of the base before ordering.
For circular cross-section legs — turned, tapered, cylindrical, and hollow tube. Ø 23 / 28 / 38 / 50 mm.
For equal-sided square legs — metal, plastic, and wood. Full corner-to-corner ABS coverage. 23 / 28 / 38 / 50 mm.
For oblong legs and sled frame contact points — mid-century modern, Scandinavian, and sled-base furniture. Full edge-to-edge ABS coverage. 33 × 19 mm.
Rectangular self-adhesive furniture slides for carpet are ideal for metal sled-base bar stools, Scandinavian dining chairs with oblong legs, mid-century accent chairs, and any oblong-legged furniture on carpeted floors or area rugs. The 33 × 19 mm size matches the compact rectangular contact points common on vintage and reproduction mid-century and sled-base designs. The peel-and-press installation requires no tools — making it accessible to every homeowner, even on complex sled frame geometries.
Hotel lobbies and lounges, restaurant dining rooms with carpeted floors, boutique hospitality venues with design-driven sled-frame furniture, co-working spaces, medical waiting rooms, and assisted living facilities. Rectangular self-adhesive furniture slides for carpet are the specification for commercial sled-frame and oblong-legged furniture on carpet — the EHBF bond withstands daily repositioning in high-traffic environments. The American Society of Interior Designers (ASID) recognizes furniture protectors as essential to commercial floor maintenance. Available in bulk quantities — visit Business Solutions for commercial pricing.
Same ABS sliding surface for carpet. Zinc-plated tubular rivet with anti-rotation mortise instead of EHBF tape — for solid wooden rectangular legs where maximum mechanical hold is preferred.
Same ABS platform and EHBF adhesive. PA6 needle-punched sliding surface instead of ABS — for hardwood, tile, laminate, vinyl, and stone. Use glides when the floor is smooth and hard; use rectangular self-adhesive furniture slides for carpet when the floor is soft or textured.
| Specification | Details |
|---|---|
Product Type |
Self-Adhesive Slides |
Shape |
Rectangular |
Materials |
ABS base, EHBF adhesive |
Floor Compatibility |
Carpets, area rugs, woven mats |
Furniture Compatibility |
Chairs, stools, benches, tables, office seating |
Leg Compatibility |
Wooden, metal, and plastic furniture legs |
Sizes Available |
33 × 19 mm (1.30 × 0.75 in) |
Color Options |
Black |
Installation Type |
Peel backing and press onto clean leg surface (wipe with 70% isopropyl alcohol first) |
Key Benefits |
Snag prevention, dent reduction, smooth gliding, strong adhesive bond |
Indoor/Outdoor Use |
Indoor | Covered Outdoor | Uncovered Outdoor |
| Shape | L × W (Dimensions) | Compatible Leg/Base Size | H (Height) |
|---|---|---|---|
Rectangular |
33 × 19 mm (1.30″ × 0.75″) |
33 × 19 – 40 × 25 mm (1.30″ × 0.75″ – 1.57″ × 0.98″) |
7.6 mm (0.30”) |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet