Square anti-slip self-adhesive furniture glides for hard floors keep square-legged furniture exactly where you place it on smooth hardwood, tile, laminate, vinyl, and stone. Full corner-to-corner NR+CR rubber grip that round glides cannot provide on square legs. EHBF (Extra High Bond Foam) acrylic tape bonds to any clean, smooth leg base — wood, metal, plastic, or hollow tube — without tools. 5 sizes from 23 × 23 mm to 75 × 75 mm. Available in multiples of 4.
Not sure what size? See the size chart ↓
📦 Sold in packs of 4 — quantity adjustable at checkout
Square anti-slip self-adhesive furniture glides for hard floors provide full corner-to-corner grip for square furniture legs of any material — wood, metal, plastic, or hollow tube — on smooth hardwood, tile, laminate, vinyl, and stone. A round anti-slip glide on a square leg loses rubber contact at all four corners. These square anti-slip self-adhesive furniture glides cover every corner edge to edge.
The 30 Shore A NR+CR (Natural Rubber + Chloroprene Rubber) surface grips the floor under compression. EHBF (Extra High Bond Foam) acrylic tape bonds to any clean, smooth leg base without tools, drilling, or rivets. 5 sizes from 23 × 23 mm to 75 × 75 mm. Available in multiples of 4.
Square anti-slip self-adhesive furniture glides for hard floors are available in five sizes to match the actual base of the leg. Correct sizing is critical — the NR+CR rubber needs full corner-to-corner contact with the floor to deliver maximum grip. An undersized glide reduces grip at the corners where it matters most.
For legs 23–27 × 23–27 mm
Lightweight accent furniture
For legs 28–37 × 28–37 mm
Side tables, display furniture
For legs 38–49 × 38–49 mm
Accent chairs, bookcases
For legs 50–74 × 50–74 mm
Dining tables, heavy cabinets
For legs 75 × 75 mm and above
Conference tables, executive furniture
For bulk orders and commercial fit-outs, visit Business Solutions. Need a wider range of square sizes for standard PA6 protection? Square self-adhesive furniture pads are available in 31 sizes from 20 × 20 mm to 300 × 300 mm.
Every square millimeter of NR+CR rubber contact contributes to grip strength — and on square legs, the four corners are the highest-load contact zones. An undersized square anti-slip self-adhesive furniture glide leaves the corners without rubber and reduces grip exactly where it matters most. Take 30 seconds to measure before you order.
Lay it on its side or flip it upside down. You need clear access to the base of each leg where the square anti-slip self-adhesive furniture glide will sit.
Use a steel rule or calipers. Measure across both sides of the leg base independently. If the two measurements differ by more than 3 mm, the leg is rectangular — use rectangular anti-slip self-adhesive furniture glides instead.
Select the square anti-slip self-adhesive furniture glide whose range includes your measurement. When a measurement falls on a boundary (e.g., 38 mm), choose the larger size — more rubber contact area means stronger grip.
Installing square anti-slip self-adhesive furniture glides takes under a minute per leg. No tools required. The EHBF acrylic foam tape bonds to wood, metal, plastic, and most composite surfaces. Corner alignment matters — a rotated glide exposes corners and reduces grip.
Square legs are common on Shaker, mission, farmhouse, Arts & Crafts, and contemporary furniture — as well as commercial metal-framed tables, bookcases, and cabinets. These are often pieces that anchor a room layout. When they drift out of position on smooth hard floors, the room loses its arrangement. Square anti-slip self-adhesive furniture glides keep them exactly where they belong.
Metal and plastic square legs cannot accept nail-on rivets — the standard attachment method for anti-slip glides on solid wood. Without a self-adhesive option, these legs are left with cheap rubber pads that peel off or rubber caps that slide off smooth finished surfaces.
Square anti-slip self-adhesive furniture glides for hard floors solve this. EHBF acrylic foam tape bonds permanently to chrome, powder-coated steel, anodized aluminum, and engineering plastics. The NR+CR rubber grips the floor. No tools, no modification to the furniture.
These square anti-slip self-adhesive furniture glides for hard floors use a chemically inert NR+CR rubber surface that does not react to floor sealers, waxes, or cleaning solutions. The rubber will not stain, discolor, or mark finished floors. The National Wood Flooring Association (NWFA) recommends placing protective glides on all furniture legs as a primary measure for maintaining hardwood floor condition.
Every component in these square anti-slip self-adhesive furniture glides for hard floors is specified for a particular engineering reason. The NR+CR rubber grips the floor. The ABS platform distributes load across all four corners. The EHBF tape holds it all permanently to the leg.
The NR+CR rubber surface on these square anti-slip self-adhesive furniture glides is rated at 30 Shore A hardness — soft enough to conform to micro-texture on smooth hard floors, firm enough to support furniture weight without excessive compression. The Shore A durometer scale measures rubber hardness — 30A is the ideal balance for floor-contact applications.
On square legs, corner contact is the key advantage over round anti-slip glides. A round glide inscribed inside a square leg leaves the four corners without rubber — the high-load zones where grip is needed most. Square anti-slip self-adhesive furniture glides place rubber at every corner, every edge, and across the full square footprint.
Closed-cell acrylic foam tape — the same adhesive technology used in automotive exterior trim and architectural glazing. EHBF conforms to micro-texture on the leg surface, creating mechanical interlock in addition to chemical adhesion.
On square anti-slip self-adhesive furniture glides, the adhesive works harder than on standard PA6 glides. The four corners generate concentrated stress points — and the NR+CR rubber amplifies those stresses by adding resistance forces. EHBF’s foam core absorbs and distributes this loading across the full bonding area instead of failing at the corners first.
The rigid platform that carries both the NR+CR rubber surface and the EHBF adhesive layer. ABS distributes the furniture’s weight evenly across all four corners — maximizing rubber contact at the high-load zones and preventing the uneven compression that reduces grip.
Cheap stick-on rubber pads use thin material on a weak adhesive backing. On square legs, the four corners bear the highest load — the exact points where cheap adhesive fails first. The pads peel off and end up on the floor within weeks.
Square anti-slip self-adhesive furniture glides for hard floors use 30 Shore A NR+CR rubber on a rigid ABS platform bonded with EHBF acrylic foam tape. The foam core absorbs corner stress instead of peeling. The rubber is thick enough to conform to floor micro-texture. The bond holds for years, not weeks.
A round anti-slip glide on a square leg leaves all four corners without rubber contact — the high-load zones where grip is needed most. The overhanging edges also catch during any movement, progressively peeling the adhesive bond from the leg.
Square anti-slip self-adhesive furniture glides for hard floors match the leg profile exactly: full rubber coverage at every corner, every edge, and across the full square footprint. No exposed corners, no overhang, no grip compromise.
Use square anti-slip nail-on furniture glides when the legs are solid wood — the mechanical rivet with anti-rotation mortise provides the strongest connection under the resistance forces that anti-slip rubber generates. Use square anti-slip self-adhesive furniture glides when the legs are metal, plastic, hollow tube, or any material that cannot accept a rivet.
Both use the same NR+CR rubber surface and ABS platform. The only difference is the attachment method: tubular rivet for solid wood, EHBF adhesive for everything else.
Square self-adhesive furniture pads use a PA6 needle-punched surface — designed to slide, not grip. They are available in 31 sizes from 20 × 20 mm to 300 × 300 mm and are an excellent choice for furniture that should move freely on smooth hard floors.
If you need anti-slip grip, pads are not the right product — use these square anti-slip self-adhesive furniture glides instead. For standard PA6 floor protection without anti-slip, pads provide the widest size selection with a simpler installation.
Square self-adhesive furniture glides come in two surface variants. Square anti-slip self-adhesive furniture glides use NR+CR rubber for grip; standard glides use PA6 for smooth sliding. The right choice depends on how the furniture is used — not the floor type.
For furniture that is regularly repositioned. The low-friction PA6 surface moves quietly across hardwood, tile, laminate, vinyl, and stone. The standard choice for dining chairs, kitchen seating, and furniture where ease of movement is the priority.
NR+CR rubber at 30 Shore A provides controlled grip across the full square footprint — including all four corners. Furniture stays exactly where it’s placed. The right choice for tables, bookcases, display furniture, and any environment where an unexpected slide is a safety hazard.
Both variants use the same ABS platform and EHBF adhesive tape. Only the surface material differs — PA6 for low friction, NR+CR for high friction.
Square anti-slip self-adhesive furniture glide shape must match the leg cross-section exactly. On anti-slip glides, shape match matters even more than on standard PA6 — every square millimeter of rubber-to-floor contact contributes to grip strength. Measure the base before ordering.
For circular cross-section legs — turned, tapered, cylindrical, and tubular steel. Ø 23 / 28 / 38 / 50 / 75 mm.
For equal-sided square legs — Shaker, mission, farmhouse, contemporary, and commercial metal-framed furniture. Full corner-to-corner rubber grip. 23 / 28 / 38 / 50 / 75 mm.
For oblong legs and sled frame contact points — mid-century modern and Scandinavian furniture design. 33 × 19 mm.
Square anti-slip self-adhesive furniture glides for hard floors are ideal for dining tables, bookcases, cabinets, display furniture, accent chairs, side tables, and any square-legged furniture that should stay in position on smooth hard floors. Especially useful for metal and plastic legs that cannot accept nail-on rivets. The 28 × 28 mm and 38 × 38 mm sizes cover the majority of residential square-legged furniture.
Restaurant tables with metal legs, hotel lobby furniture, healthcare waiting room seating, office furniture with square steel legs, retail display fixtures, boat cabin furniture, and RV built-ins. Square anti-slip self-adhesive furniture glides for hard floors bond to chrome, powder-coated steel, and anodized aluminum without tools — the standard choice for commercial metal-legged furniture where unexpected movement is a liability. Available in bulk quantities — visit Business Solutions for commercial pricing.
Identical ABS platform and EHBF adhesive. PA6 low-friction sliding surface instead of NR+CR rubber — for square-legged furniture that should glide freely on smooth hard floors.
Same NR+CR rubber surface. Zinc-plated tubular rivet with anti-rotation mortise instead of adhesive — the strongest possible connection for solid wooden square legs.
| Specification | Details |
|---|---|
Product Type |
Anti-Slip Self-Adhesive Glides |
Shape |
Square |
Materials |
ABS plastic body, NR + CR anti-slip surface, EHBF adhesive |
Fit Style |
Adhesive-backed (peel-and-stick) |
Floor Compatibility |
Hardwood, tile, laminate, LVT, concrete, stone, etc |
Furniture Compatibility |
Chairs, stools, benches, tables, office seating |
Leg Compatibility |
Wooden, metal, and plastic furniture legs |
Sizes Available |
23×23–75×75 mm (0.91×0.91–2.95×2.95 in) |
Color Options |
Black |
Installation Type |
Peel backing and press onto clean leg surface (wipe with 70% isopropyl alcohol first) |
Key Benefits |
Anti-slip stability, scratch protection, smooth gliding, strong adhesive bond |
Indoor/Outdoor Use |
Indoor | Covered Outdoor |
| Shape | L × W (Dimensions) | Compatible Leg/Base Size | H (Height) |
|---|---|---|---|
Square |
23 × 23 mm (0.91″ × 0.91″) |
23 × 23 – 27 × 27 mm (0.91″ × 0.91″ – 1.06″ × 1.06″) |
12 mm (0.47") |
Square |
28 × 28 mm (1.10″ × 1.10″) |
28 × 28 – 37 × 37 mm (1.10″ × 1.10″ – 1.46″ × 1.46″) |
12 mm (0.47") |
Square |
38 × 38 mm (1.50″ × 1.50″) |
38 × 38 – 49 × 49 mm (1.50″ × 1.50″ – 1.93″ × 1.93″) |
12 mm (0.47") |
Square |
50 × 50 mm (1.97″ × 1.97″) |
50 × 50 – 74 × 74 mm (1.97″ × 1.97″ – 2.91″ × 2.91″) |
12 mm (0.47") |
Square |
75 × 75 mm (2.95″ × 2.95″) |
75 × 75 mm + (2.95″ × 2.95″) |
12 mm (0.47") |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet