Rectangular furniture legs drift more than any other shape on smooth, hard floors. Rectangular anti-slip nail-on furniture glides use a 30 Shore A NR+CR (Natural Rubber + Chloroprene Rubber) surface that grips hardwood, tile, laminate, vinyl, and stone across the full oblong footprint. The zinc-plated tubular rivet with anti-rotation mortise locks into solid wooden legs — preventing detachment and rotational misalignment. Available in 33 × 19 mm (1.30″ × 0.75″). Sold in multiples of 4.
Not sure what size? See the size chart ↓
📦 Sold in packs of 4 — quantity adjustable at checkout
Rectangular anti-slip nail-on furniture glides for hard floors are the correct solution when oblong wooden furniture legs must stay exactly where you place them on smooth hardwood, tile, laminate, vinyl, and stone. Rectangular legs drift more than any other shape on smooth floors — the elongated contact surface generates higher shear forces along the long axis and asymmetric rotational torque that walks the furniture out of position.
These rectangular anti-slip nail-on furniture glides place a 30 Shore A NR+CR (Natural Rubber + Chloroprene Rubber) grip surface across the full oblong footprint. The zinc-plated tubular rivet with anti-rotation mortise locks into solid wood — preventing both detachment and the rotational misalignment that rectangular legs are especially prone to under lateral load.
Available in 33 × 19 mm (1.30″ × 0.75″). Available in multiples of 4. For wooden furniture legs only. For metal, plastic, or hollow legs, use rectangular anti-slip self-adhesive furniture glides. For furniture that should glide freely, use rectangular nail-on furniture glides with PA6 surface.
Rectangular anti-slip nail-on furniture glides for hard floors are available in one size designed to fit the standard oblong leg profile found on mid-century modern, Scandinavian, and contemporary furniture designs. Correct sizing is critical on anti-slip glides — the NR+CR rubber surface needs full contact with the floor across the entire rectangular footprint to deliver maximum grip.
For legs 33–40 × 19–25 mm
Mid-century chairs, modern dining, Scandinavian designs
Need a wider range of rectangular sizes for standard PA6 protection? Rectangular self-adhesive furniture pads are available in over 100 sizes across 6 width groups, with lengths up to 300 mm and strips up to 510 mm. For bulk orders and commercial fit-outs, visit Business Solutions.
Correct sizing is even more important on rectangular anti-slip nail-on furniture glides than on standard PA6 glides. Rectangular legs have two different measurements — length and width — and every millimeter of NR+CR rubber contact across both axes contributes to grip strength. A glide that matches the length but not the width will overhang on the short sides and catch on floor transitions. Measure both dimensions before ordering.
Lay it on its side or flip it upside down. You need clear access to the base of each leg where the rectangular anti-slip nail-on furniture glide will sit.
Use a steel rule or calipers. Measure the long side and the short side of the leg base independently. The 33 × 19 mm rectangular anti-slip nail-on furniture glide fits legs approximately 33–40 mm long × 19–25 mm wide.
If both measurements fall within the 33–40 × 19–25 mm range, this rectangular anti-slip nail-on furniture glide is the correct choice. If the leg is larger, use rectangular self-adhesive furniture pads in the matching size for PA6 floor protection.
Installing rectangular anti-slip nail-on furniture glides takes under a minute per leg. No pre-drilling required on any hardwood, MDF, or softwood species. Long-axis alignment during installation is critical — the anti-rotation mortise locks after the rivet is seated, and on anti-slip glides a misaligned edge means reduced rubber contact and reduced grip along the full length.
Rectangular legs are the signature of mid-century modern, Scandinavian, and contemporary furniture design — styles where form and placement are part of the aesthetic. These are often statement pieces: accent chairs, display tables, side tables, credenzas. When they drift out of position on smooth hard floors, the design intent is lost. Rectangular anti-slip nail-on furniture glides keep them exactly where they belong.
Rectangular legs generate higher shear forces along the long axis during movement than round or square legs. The elongated contact surface also creates asymmetric rotational torque — forces that try to walk the furniture in an arc rather than a straight line. On smooth hard floors, this combination means rectangular-legged furniture drifts further and faster than any other leg shape.
Rectangular anti-slip nail-on furniture glides for hard floors solve both problems. The NR+CR rubber grips the floor under compression across the full oblong footprint, resisting shear along the long axis. And the anti-rotation mortise prevents the rotational misalignment that would reduce rubber contact area over time.
These rectangular anti-slip nail-on furniture glides for hard floors use a chemically inert NR+CR rubber surface that does not react to floor sealers, waxes, or cleaning solutions. The rubber will not stain, discolor, or mark finished floors. The National Wood Flooring Association (NWFA) recommends placing protective glides on all furniture legs as a primary measure for maintaining hardwood floor condition — the NR+CR rubber surface on these rectangular anti-slip nail-on furniture glides meets that standard while adding the grip that PA6 glides cannot provide. Compatible with every smooth hard floor type.
Every component in these rectangular anti-slip nail-on furniture glides for hard floors is specified for a particular engineering reason. The NR+CR rubber surface provides the grip. The ABS platform distributes load across the full elongated footprint. The ZnFe rivet with mortise locks it all permanently to the wood — and prevents the rotational misalignment that rectangular legs are uniquely prone to.
The NR+CR rubber surface on these rectangular anti-slip nail-on furniture glides is rated at 30 Shore A hardness — soft enough to conform to micro-texture on smooth hard floors, firm enough to support furniture weight without excessive compression. The Shore A durometer scale measures rubber hardness — 30A sits in the range between soft grip compounds and structural rubber, the ideal balance for floor-contact applications.
On rectangular legs, the elongated rubber footprint is the key advantage. The NR+CR surface spans the full length and width of the oblong contact area — resisting the directional shear forces that rectangular legs generate along the long axis. More rubber along the long axis means stronger resistance to the primary drift direction.
The rivet’s razor-sharp tubular edge separates wood fibers rather than removing them. The entry hole closes back when the rivet is removed — unlike a plain nail hole, which widens with every movement and replacement.
On rectangular anti-slip nail-on furniture glides, the anti-rotation mortise is especially critical. Asymmetric loading on oblong legs creates rotational torque — forces that try to spin the glide around the rivet axis. Because the rubber surface generates resistance forces that amplify this torque, the mortise must absorb significantly higher rotational stress than on standard PA6 glides. Even a few degrees of rotation on a rectangular anti-slip glide dramatically reduces effective rubber contact area and grip strength along the exposed edge.
The rigid rectangular platform that carries both the NR+CR rubber surface and the rivet. ABS distributes the furniture’s weight evenly across the full elongated footprint — maximizing rubber contact along the entire long axis. Without the rigid platform, the rubber would compress unevenly under the asymmetric loading that rectangular legs produce, reducing the effective grip area at the ends where it matters most.
Cheap stick-on rubber pads and silicone dots use thin material on a weak adhesive backing. On rectangular legs, asymmetric shear forces along the long axis create the worst possible loading pattern for adhesive — the pad peels from one end first, then progressively along the full length. Within weeks, cheap rubber pads on rectangular legs end up on the floor.
Rectangular anti-slip nail-on furniture glides for hard floors use 30 Shore A NR+CR rubber on a rigid ABS platform, mechanically riveted into solid wood. The rivet cannot peel. The platform distributes load evenly across the full oblong footprint. The rubber surface on these rectangular anti-slip nail-on furniture glides is thick enough to conform to floor micro-texture for maximum grip — not a thin film that provides minimal friction along a rectangular contact area.
A round anti-slip glide inscribed inside a rectangular leg leaves the two long edges completely without rubber contact — the exact edges that generate the most shear force during movement and where grip is needed most. A square glide oversized to cover the length leaves the short sides overhanging, catching on floor transitions and creating an uneven pivot point that amplifies rather than resists rotational drift.
Rectangular anti-slip nail-on furniture glides match the leg profile exactly: full rubber coverage along the long axis, full width across the short axis. No exposed edges, no overhang, no compromise on grip.
Standard PA6 rectangular nail-on furniture glides are designed for low friction — they help furniture slide smoothly. If the furniture is drifting, creeping, or migrating on smooth floors and you want it to stop, PA6 glides will not solve the problem. They are engineered to do the opposite.
Rectangular anti-slip nail-on furniture glides for hard floors use NR+CR rubber instead of PA6 — a high-friction surface instead of a low-friction surface. Same ABS platform. Same ZnFe rivet with anti-rotation mortise. Opposite result. View standard PA6 rectangular nail-on furniture glides →
Rectangular self-adhesive furniture pads use a PA6 needle-punched surface — designed to slide, not grip. They are available in over 100 rectangular sizes across 6 width groups with lengths up to 300 mm and strips up to 510 mm — a vastly wider size range than the single 33 × 19 mm glide.
If you need anti-slip grip, pads are not the right product — use these rectangular anti-slip nail-on furniture glides or rectangular anti-slip self-adhesive furniture glides instead. For standard PA6 floor protection without anti-slip, pads provide the widest size selection with a simpler peel-and-stick installation — especially for rectangular legs larger than 40 × 25 mm where glides aren’t available.
Rectangular nail-on furniture glides come in two surface variants. Rectangular anti-slip nail-on furniture glides use NR+CR rubber for grip; standard glides use PA6 for smooth sliding. The right choice depends on how the furniture is used — not the floor type.
For furniture that is regularly repositioned. The low-friction PA6 surface moves quietly across hardwood, tile, laminate, vinyl, and stone with minimal effort. The standard choice for mid-century dining chairs and contemporary seating where ease of movement is the priority.
NR+CR rubber at 30 Shore A provides controlled grip across the full rectangular footprint. Furniture stays exactly where it’s placed. The right choice for mid-century accent furniture, display pieces, boat cabin furniture, and any environment where rectangular-legged furniture must hold position on smooth hard floors.
Both variants use the same ABS platform and ZnFe tubular rivet with anti-rotation mortise. Only the surface material differs — PA6 for low friction, NR+CR for high friction.
Rectangular anti-slip nail-on furniture glide shape must match the leg cross-section exactly. On anti-slip glides, shape match matters even more than on standard PA6 — every square millimeter of rubber-to-floor contact area contributes to grip strength. A round anti-slip glide on a rectangular leg loses rubber contact along both long edges. Measure the base before ordering.
For circular cross-section legs — turned, tapered, and cylindrical. Ø 23 / 28 / 38 / 50 / 75 mm.
For equal-sided square legs. Full corner-to-corner rubber grip. 23 / 28 / 38 / 50 / 75 mm.
For oblong legs with unequal sides — the characteristic profile of mid-century modern and Scandinavian furniture design. Full-length rubber grip. 33 × 19 mm.
Rectangular anti-slip nail-on furniture glides for hard floors are ideal for mid-century modern accent chairs, Scandinavian side tables, display furniture, credenzas, and any rectangular-legged wooden furniture that should stay in position on smooth hard floors. Also ideal for furniture near stairs, on raised platforms, or in homes with children and pets where stability is a safety concern.
Restaurants, hotels, and offices with mid-century or contemporary wooden furniture, retail display fixtures, boat cabin furniture, and RV built-ins. Rectangular anti-slip nail-on furniture glides for hard floors are the preferred choice in commercial environments where unexpected furniture movement creates a liability — the anti-rotation mortise prevents the asymmetric misalignment that high-traffic rectangular legs experience, and mechanical riveting provides the strongest connection. The NR+CR rubber maintains grip under the dynamic forces of moving vessels. Available in bulk quantities — visit Business Solutions for commercial pricing.
Identical ABS platform and ZnFe rivet with anti-rotation mortise. PA6 low-friction sliding surface instead of NR+CR rubber — for rectangular-legged wooden furniture that should glide freely on smooth hard floors.
Same NR+CR rubber surface. EHBF adhesive backing instead of rivet — for metal, plastic, or hollow rectangular furniture legs and sled frames that can’t accept a nail-on fitting.
| Specification | Details |
|---|---|
Product Type |
Rectangular Anti-Slip Nail-On Furniture Glides |
Shape |
Rectangular |
Materials |
NR+CR rubber surface, ABS base plate, ZnFe steel tubular rivet |
Shore Hardness |
30 Shore A |
Fit Style |
Nail-on tubular rivet — no pre-drilling required |
Leg Compatibility |
Solid wooden furniture legs only |
Floor Compatibility |
All hard floors — hardwood, laminate, vinyl, tile, stone, concrete, marine flooring |
Furniture Compatibility |
Mid-century modern, Scandinavian & contemporary furniture with oblong legs |
Sizes Available |
33 × 19 mm (1.30″ × 0.75″) |
Color Options |
Black |
Installation Type |
Tap in with hammer or rubber mallet |
Indoor/Outdoor Use |
Indoor | Covered Outdoor |
| Shape | L × W (Dimensions) | Compatible Leg/Base Size | Ø1 (Rivet Diameter) | H (Height) | H1 (Rivet Height) |
|---|---|---|---|---|---|
Rectangular |
33 × 19 mm (1.30″ × 0.75″) |
33 × 19 – 40 × 25 mm (1.30″ × 0.75″ – 1.57″ × 0.98″) |
9.2 mm (0.36″) |
12 mm (0.47") |
5.5 mm (0.22″) |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet